Replacement Hub and Drum Assembly for 2011 Aluma Trailer 8218
Updated 03/14/2022 | Published 03/13/2022
Products Featured in This Question
Question:
I have a 2011 Aluma trailer model 8218. The VIN # is 1YGHD1826CB074858. It has 14 wheels with 5 on 4.5 bolt pattern. I am looking for the complete hub and drum brake assembly. Which part number do I need? -Thanks
asked by: Renato S
Expert Reply:
I reached out to Aluma Trailers and found that you have a 3,500 lb axle that uses a # L68149 inner and # L44649 outer bearing. Based on this information you will be able to use the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K you were looking at. This assembly uses the same bearings and has the 5 on 4-1/2 bolt pattern you are need for your wheels.
For brakes, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These have a 4 bolt brake mounting flange pattern and are made for 3,500 lb axles. These are self-adjusting brakes so they do not require periodic manual adjustment like standard brakes.
I have attached some review and installation videos for your reference.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Easy Grease Trailer Idler Hub for 2K Axles Spec Review
- Q&A: Replacement Hub Assembly for an Aluma 548 Trailer
- Q&A: Are The Westlake ST205/75R15 Radial Trailer Tires Super ST Or ST100?
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Comparison of Dexter and etrailer.com Idler Hubs for 2,000 Pound Axles
- Q&A: Replacement Trailer Axle For a 10 X 6 Aluma Utility Trailer That Has A Torsion Axle
- Q&A: Difference Between Grease Seal 10-9 and 10-60
- Q&A: Upgrading Tire Size on a Harbor Freight Trailer
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Grease Seal
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer lights
on Trailer Hubs and Drums
