Comparison of Dexter and etrailer.com Idler Hubs for 2,000 Pound Axles
Updated 05/23/2017 | Published 05/22/2017
Products Featured in This Question
Question:
What is the difference between the economy and value hub assy AKIHUB-440-2-2K vs 8-91-05UC1 Thanks
asked by: Bob
Expert Reply:
The two trailer hubs # AKIHUB-440-2-2K from etrailer and # 8-91-05UC1 from Dexter are basically the same product from two different manufacturers. They're both hubs for 2,000 pounds axles with 4 on 4 bolt patterns and use the same # L44649 inner and outer bearings.
The Dexter hub does have a little higher weight capacity at 1,250 pounds vs. the 1,000 pounds of the etrailer hub. However, the price difference is mainly determined from our relationships with the manufacturers and therefore the cost savings we receive are then passed down to the customer.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 8 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Easy Grease Trailer Idler Hub for 2K Axles Spec Review
- Q&A: Replacement Hub Assembly for an Aluma 548 Trailer
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Grease Seal - Double Lip - I.D. 1.500" / O.D. 1.987" - 2,000-lb to 2,500-lb Axles - Qty 1
- Q&A: Are The Westlake ST205/75R15 Radial Trailer Tires Super ST Or ST100?
- Q&A: Recommended 2200lb Axle That Uses 3500lb Hubs and Bearings
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Solution for Damaged Spindle and Hub on Dexter 2,000 Pound Torsion Axle
- Q&A: Replacement Trailer Axle For a 10 X 6 Aluma Utility Trailer That Has A Torsion Axle
- Q&A: Replacement Hub Seal for Axle of Aluma 548 Trailer
- Shop: Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - 10" - 12" Wheels - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Brake Controller
- Search Results: trailer lights
on Trailer Hubs and Drums
