Moving Propane Tank Bracket On a Travel Trailer For Fastway e2 Weight Distribution to Fit Properly
Updated 03/14/2022 | Published 03/13/2022
Products Featured in This Question
Question:
I have the E2 800lb system. It is mounted on a grand design imagine 2910 trailer. The L brackets are as far forward as they can be due to the propane tank bracket. At 90 turning, the spring bar end is halfway through the L bracket, if I turn as sharp as I can, I’m afraid the spring bar will pull out of the L bracket. Can I buy longer bars? I should buy the 1000lb bars anyways due to a little higher hitch weight anyways. Please help….
asked by: Dean L
Expert Reply:
You will not need to change the bars on your Fastway e2 weight distribution hitch unless you decide to move up to the 1,000lb bars. The propane tank bracket on your Grand Design Imagine 2910 travel trailer is mounted to the top of you frame with screws. You simply need to remove the tanks to access the screws and move the propane tank Pan # 37207-30485 into a position that will allow for your frame brackets to fit in the correct location(See image of slots for propane tank pan below). Fastway does not make longer bars for their weight distribution hitches.
Since you did not specify if you had a Fastway e2 Trunnion # FA92-00-0800 or Round Bar # FA94-00-0800 you will need to select the correct 1,000lb bars.
Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems # FA92-01-1099
Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW # FA94-02-1099
(click to enlarge)
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Q&A: Will a Longer Weight Distribution System Shank Work with B&W Continuum Weight Distribution System
- Q&A: Is It Safe to Tow Cross Country Using a 2-1/2 to 2 Reducer Sleeve
- Shop: B&W Continuum Weight Distribution w Sway Control and Long Shank - 16K GTW, 1.6K TW
- Video: B&W Continuum Weight Distribution System Review
- Shop: B&W Continuum Weight Distribution Load Bars - Underslung Coupler
- Shop: B&W Continuum Weight Distribution Load Bars - Standard Coupler
- Q&A: Curt Weight Distribution System Compared to Husky Center Line System for Towing Camper
- Q&A: Troubleshooting Husky Centerline TS Weight Distribution Hitch Causing Tow Vehicle To Pull Right
- Q&A: Recommended Weight Distribution System for 11,000 Pound Travel Trailer
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW
- Shop: Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Search Results: tongue weight scale
- Video: Review of Big Truck Big RV Tongue Weight Scale - Analog Scale - BTBRV27FR
- Q&A: Weight Distribution Hitch for Trailer With 11,495 lb GVWR
- Q&A: How To Extend Weight Distribution Hitch To Clear Tailgate on Truck
- Video: What to Know About the Equal-i-zer Weight Dist Shank
- Shop: Towing Mirrors