Brake Controller Location in 2021 Ford F-350

Question

Question:

Where is the brake controller plug on a 2021 Ford super duty?

asked by: Gary B

0

Expert Reply:

The brake controller plug is located behind the coin tray that's just to the left of the HVAC controls on your 2021 Ford Super Duty. I've shown the location with some photos, and you can also see the location in the linked installation video.

If you don't already have a brake controller in mind, I'd recommend the Tow Pro Liberty by Redarc, part # RED24FR. The main unit installs under the dash so it's out of the way. You'd adjust the brakes using the remote-mounted control knob that can mount anywhere within easy reach of the driver. An un-used switch knockout makes the perfect mounting location. To install the controller, you'll need a # 22292 harness and a # 331-TPH-017 adapter.

I've linked to a video explaining how the # RED24FR Tow-Pro Liberty works.

expert reply by: Mike L

0

2021 Ford F-350 Brake Controller Connector Location
(click to enlarge)

Answer 1

Yes we have the Prodigy P2 part #90885 which would be a really excellent choice for a brake controller for your 2017 Ford E-450 with the install harness part #22292 and you'd be set. This is a proportional brake controller that senses the amount…

view full answer...

Answer 2

The controller should be proportional in your 2017 Ford truck which means that you'd have to be moving to have the brakes on the trailer lock up with the truck. Is there any type of output visible on the brake controller when you apply the…

view full answer...

Answer 3

For your 2022 Ford F-450 cab & chassis, and your Tekonsha Prodigy P2 #90885, the correct wiring adapter is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #22292.

view full answer...

Answer 4

It looks like your 2018 Jayco Redhawk 29xk was built on a E-450 cab and chassis. The Tekonsha Plug-In Wiring Adapter item #22292 will plug into a port behind the instrument cluster finish panel in the center of the dash on the driver's side. I…

view full answer...

Answer 5

The pins of your 2021 Ford E-450 do actually match the pin out of the #22292 which is also known sometimes as the 3036 so yes this would be the correct harness. You also could repin what you have now so that you could get on the road quickly.…

view full answer...

Answer 6

It sounds like you installed the red wire in the correct location, however the ABS brake light on your dash seems to contradict that. I recommend retesting the switch where you connected the red wire of your brake controller. There not only should be…

view full answer...

Answer 7

The problem is either the wiring of your brake controller or the brake controller itself has internal problems. What it sounds like is happening is that the stoplight switch of your brake controller (usually red) is backfeeding onto the brake light…

view full answer...

Answer 8

Hey Phil, If you're looking for the factory wire harness for a plug and play connection you'll find a connector that's gray with a red/orange center like the plug on the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51436.…

view full answer...

Answer 9

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 10

According to my research, the brake controller port on your 2015 Ford Flex should be located under the dash directly below the steering column as shown in the attached photo. Please note there is a dummy plug on the end of the port that you will need…

view full answer...

Answer 11

Hey Jake congrats on your new purchase! Your 2023 Forest River Forester LE 3251DSLE was built on a 2022 Ford E-450 chassis so you'll need the Tekonsha Plug-In Wiring Adapter item #22292. This will give you a simple plug and play install with the…

view full answer...

Answer 12

It seems like you may have the incorrect wiring connector and the harness in the photo is not the correct fit. For your 2015 Lincoln Navigator, the correct wiring adapter is #22292 for your Tekonsha Prodigy P3 #90195. If you have the factory 7-way or…

view full answer...

Brake Controller Location in 2021 Ford F-350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching