2015 Lincoln Navigator Brake Controller Wiring Harness Connection Location

Question

Question:

I have bought both the 3035 and 3036 brake controller wiring adapters and neither fit on my 2015 Lincoln Navigator. I can only find one open plug under my dash. Neither connector recommended by this site fits. Is it possible I havent found the right connector under my dash? I have torn off panels and looked everywhere. The only blank connector under my dash is pictured. Id appreciate help in locating the connector in my car. Ive even torn off the panel by the push button start recommended in the pics for Ford f150 but no specific pics for Navigator and I didnt find it there either.

asked by: Brandon

0

Expert Reply:

It seems like you may have the incorrect wiring connector and the harness in the photo is not the correct fit. For your 2015 Lincoln Navigator, the correct wiring adapter is # 22292 for your Tekonsha Prodigy P3 # 90195. If you have the factory 7-way or factory 4-way, this harness will work. The connector will be located in the center of the dash on the driver's side behind a trim panel. I've attached the installation details to assist as well as some videos to help.

The wiring harness # 3035-P is only a fit for Navigator models from 1998 to 2012. Your 2015 will use the harness # 22292 which fits Navigator models from 2015 to 2017.

expert reply by: Jason S

0

click to enlarge

Brandon

8/23/2018

I have bought both the 3035 and 3036 brake controller wiring adapters and neither fit on my 2015 Lincoln Navigator. I can only find one open plug under my dash. Neither connector recommended by this site fits. Is it possible I havent found the right connector under my dash? I have torn off panels and looked everywhere. The only blank connector under my dash is pictured. Id appreciate help in locating the connector in my car. Ive even torn off the panel by the push button start recommended in the pics for Ford f150 but no specific pics for Navigator and I didnt find it there either.

Jason S.

8/23/2018

I reached out to my tech contact at Tekonsha and the # 22292 which is the 3036-P you mentioned is the confirmed fit. They said the wiring connection is behind the dash near the center console, but they don't have any pictures. The photo you sent is not the correct harness. If your vehicle has this harness, then it may be taped to other wires and even tucked up under the dash. Sometimes there is a cap on the end and other times there is not. Sorry I can't give you a more precise location or photos.

Answer 1

The correct Edge CS2 programmer you would need for your 2014 Chevy Silverado 1500 is the part #EP85350 which can give you up to 18 horsepower and 27 ft lbs of torque.

view full answer...

Answer 2

Hi Jim; it can be hard to tell but the #RED67CR does include the custom wiring harness for your 2017 Lincoln Navigator. This will allow for a plug and play installation using your factory tow port.

view full answer...

Answer 3

The connection point for the 2013 Lincoln Navigator is under the instrument panel above the brake pedal. I have attached an image to better help you see where it is located. The custom fit wiring harness for your 2013 Lincoln Navigator is dependent…

view full answer...

Answer 4

There should be a factory brake controller plug on your 2015 Ford F-150, whether it came with a 4-Way or 7-Way connector at the back of the truck. The plug will be located beneath the dash inside your cab. You may need to remove some shroud around…

view full answer...

Answer 5

Yes, you can install the Redarc Tow-Pro Liberty Brake Controller #RED24FR on your 2020 Ford F-150 XLT. You will need the Tekonsha Plug-In Wiring Adapter #22292 to connect to the factory connector on your F-150 that came with a 7-way towing connector.…

view full answer...

Answer 6

Installing the Prodigy P3 part #90195 is pretty easy on your 2015 Lincoln Navigator. Basically you need to remove a panel on the dash and the connector is there for you to attach to. See attached picture. A mechanic could knock it out really easily…

view full answer...

Answer 7

Yes we have the Prodigy P2 part #90885 which would be a really excellent choice for a brake controller for your 2017 Ford E-450 with the install harness part #22292 and you'd be set. This is a proportional brake controller that senses the amount…

view full answer...

Answer 8

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 9

Hey Phil, If you're looking for the factory wire harness for a plug and play connection you'll find a connector that's gray with a red/orange center like the plug on the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51436.…

view full answer...

Answer 10

The distance from the end of the spindle to the face of the brake flange on the #84 E-Z Lube Spindle w/ Brake Flange #TRU74FR is 5-3/8". See the diagram below which shows this measurement.

view full answer...

Answer 11

Hey Jake congrats on your new purchase! Your 2023 Forest River Forester LE 3251DSLE was built on a 2022 Ford E-450 chassis so you'll need the Tekonsha Plug-In Wiring Adapter item #22292. This will give you a simple plug and play install with the…

view full answer...

Answer 12

The problem is either the wiring of your brake controller or the brake controller itself has internal problems. What it sounds like is happening is that the stoplight switch of your brake controller (usually red) is backfeeding onto the brake light…

view full answer...

2015 Lincoln Navigator Brake Controller Wiring Harness Connection Location

Featured Help Information

Miscellaneous Media

Continue Researching