Brake Controller Recommendation for 2017 Ford E-450

Question

Question:

looking for a electric brake controller and wiring harness for under the dash. My camper already came with the 7 pin trailer on the rear bumper. 2017 E450.

asked by: Tom S

0

Expert Reply:

Yes we have the Prodigy P2 part # 90885 which would be a really excellent choice for a brake controller for your 2017 Ford E-450 with the install harness part # 22292 and you'd be set.

This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy as it is incredibly reliable, works, well and is easy to use. It can easily be transferred to future vehicles as well.

expert reply by: Jameson C

0

Answer 1

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 2

Yes, the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR would be a fit for a 2023 Ford E-450 chassis for a Class C motorhome.

view full answer...

Answer 3

The brake controller plug is located behind the coin tray that's just to the left of the HVAC controls on your 2021 Ford Super Duty. I've shown the location with some photos, and you can also see the location in the linked installation video.…

view full answer...

Answer 4

It looks like your 2018 Jayco Redhawk 29xk was built on a E-450 cab and chassis. The Tekonsha Plug-In Wiring Adapter item #22292 will plug into a port behind the instrument cluster finish panel in the center of the dash on the driver's side. I…

view full answer...

Answer 5

The distance from the end of the spindle to the face of the brake flange on the #84 E-Z Lube Spindle w/ Brake Flange #TRU74FR is 5-3/8". See the diagram below which shows this measurement.

view full answer...

Answer 6

Hey Jake congrats on your new purchase! Your 2023 Forest River Forester LE 3251DSLE was built on a 2022 Ford E-450 chassis so you'll need the Tekonsha Plug-In Wiring Adapter item #22292. This will give you a simple plug and play install with the…

view full answer...

Answer 7

The pins of your 2021 Ford E-450 do actually match the pin out of the #22292 which is also known sometimes as the 3036 so yes this would be the correct harness. You also could repin what you have now so that you could get on the road quickly.…

view full answer...

Answer 8

Hey Phil, If you're looking for the factory wire harness for a plug and play connection you'll find a connector that's gray with a red/orange center like the plug on the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51436.…

view full answer...

Answer 9

It sounds like you installed the red wire in the correct location, however the ABS brake light on your dash seems to contradict that. I recommend retesting the switch where you connected the red wire of your brake controller. There not only should be…

view full answer...

Answer 10

The problem is either the wiring of your brake controller or the brake controller itself has internal problems. What it sounds like is happening is that the stoplight switch of your brake controller (usually red) is backfeeding onto the brake light…

view full answer...

Answer 11

The controller should be proportional in your 2017 Ford truck which means that you'd have to be moving to have the brakes on the trailer lock up with the truck. Is there any type of output visible on the brake controller when you apply the…

view full answer...

Answer 12

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Brake Controller Recommendation for 2017 Ford E-450

Continue Researching