Replacement Hub and Drum Assembly and Electrics Brakes for a Dexter P-11 SLR Axle

Updated 03/03/2022 | Published 03/01/2022

Products Featured in This Question

Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

(1627)

$223.24

Cotter Pin - 1/8" Thick x 1-3/4" Long

(813)

$1.15

Trailer Spindle Nut 1"

(443)

$13.13

Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs

(311)

$78.03

Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs

(302)

$83.92

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1708)

$103.48

Question:

Hello, I have a 16ft open center car trailer, dual axle, dual electric drum brake, model and brand are a little unknown. Anyway it has DEXTER P-11 SLR model axles, I measured the bolt pattern, came out as a 5 on 4 1/2. I want to replace hub idlers, hub and drum assemblies and the drum electric brakes? As well as new axle nuts and cotter pins. Want to refresh it all! I added some photos of the axle stamps. I am in need of assistance on the part numbers and so on. Thank you!

asked by: Brendan S

Expert Reply:

Thanks for the pictures! I reached out to Dexter and got some information about your axle. You will need the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - item # AKHD-545-35-EZ-K for replacement hubs. These come with all bearings and seals necessary. They are sold individually.

For your brakes you will need the Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs item # 23-27 and the Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs item # 23-26.

For your castle nut and cotter pins you'll want the Trailer Spindle Nut item # 165686 and Cotter Pin item # 165649.