Crossbar System for a Retrax XR Tonneau Cover on a 2022 Ford F-350

Question

Question:

I’ve been searching but havent found exactly what all is needed to add crossbars to a Retrax XR cover on a 2022 F350. There seems to be a lot of options which all vary in size and shape. I havent picked up the truck yet so can go and measure the distance from slot to slot. Any ideal what size bars are needed that will fit but not extend past the sides of the truck? Also, what else is needed to actually mount the bars in the slots? I’ve heard some need adapters or other specific items for the XR rail. Thanks!

asked by: Samuel S

1

Helpful Expert Reply:

For a set of crossbars and the feet that will attach them to your Retrax XR on your 2022 Ford F-350, you can use the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers # RRVA180B-RRRLT600. According to Retrax, this will fit any of the Retrax XR covers that fit your 2022 Ford F-350 (T-60383, T-70383, T-80383, T-90383 or the T-80384 if you have an 8' bed).

expert reply by: Scott S

1

Retrax XR Crossbar System Compatibility
(click to enlarge)

Answer 1

I would be happy to help you. The RetraxPRO XR Hard Tonneau Cover item #RTT-80384 is the correct tonneau cover for the 8 foot bed model 2022 Ford F-350. I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 2

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Answer 3

Hey Parvez, glad I could help! So the Rhino Rack Vortex Crossbars for Retrax XR tonneau covers part #RRVA180B-RRRLT600 was designed specifically to work with your RetraxOne XR tonneau cover so it is going to definitely have enough clearance above…

view full answer...

Answer 4

Yes, to keep the Rhino-Rack Vortex Crossbars #RRVA180B-RRRLT600 from interfering with the operating handle on your Retrax XR cover you just need the Roof Rack Leg Spacer Blocks #RRQMVA25. These will raise the crossbars 25 mm (0.98") more above…

view full answer...

Answer 5

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

view full answer...

Answer 6

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 7

Hi Brian; the channel is 7/8" wide x 1/4" tall and the opening at the top is 7/16" wide. I went ahead and attached a diagram below with the measurements. The spacers #RRQMVA25 to clear the handle are the only other thing you will need…

view full answer...

Answer 8

Rhino Rack actually has a kit designed specifically for fitting the tracks of a RetraxPro XR ladder rack with the part number #RRVA180B-RRRLT600 which gives you 71 inch bars or part #RRVA165B-RRRLT600 which gives 65 inch long crossbars. The part…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Crossbar System for a Retrax XR Tonneau Cover on a 2022 Ford F-350

Featured Help Information

Miscellaneous Media

Continue Researching