Are Spacers Needed For Rhino-Rack Vortex Crossbar System for Retrax XR Tonneau Covers

Published 06/24/2022

Products Featured in This Question

Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 10 mm Thick - Qty 2

(4)

$19.99

Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 15 mm Thick - Qty 2

(21)

$19.99

Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 20 mm Thick - Qty 2

(8)

$19.99

Question:

I saw a review that suggested spacers are needed under the feet of the “Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers” in order for the Retrax latch/handle to clear the bars when opening the cover. What part number is this? And is it really needed? What height above the retrax cover will the bars be? This is for a Ford F-150 2016 short bed with a retrax Xr cover. Thanks!!

asked by: Steve S

Expert Reply:

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long # RRVA180B-RRRLT600.

This system will be approximately 4-1/4" to the top of the crossbar, so if you like you can add height with spacers, and can use any of the following:

- Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 10 mm (about 3/8") # RRQMVA10

- Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 15 mm (about 9/16") # RRQMVA15

- Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 20 mm (about 3/4") # RRQMVA20

expert reply by: Kyle S