Can I Use an Anti-Rattle Device with the Hitch Cap Sensor # C56UR?

Question

Question:

Will this cover preclude me from using a hitch anti-rattle / stabilizer device? If it is plastic, will the device crush the plastic?

asked by: Ken

0

Expert Reply:

As far as using an anti-rattle device with the 2" Hitch Cap Sensor for GMC Sierra MultiPro and Chevy Silverado Multi-Flex Tailgate # C56UR, it depends on what style of anti-rattle device you have. For example, if you have an anti-rattle hitch pin like the # 63232, these will not interfere with the # C56UR. However, while not specifically tested, if you have a harness-style anti-rattle device like the Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers # PS63091, these will most likely interfere with the cap sensor.

Any hitch-pin style anti rattle device will not crush the plastic housing of the sensor because the sensor does not install over/inside of the hitch pin hole. I do not recommend using a harness-style anti-rattle device with the sensor.

expert reply by: Bob C

0

Answer 1

There isn't an anti-rattle locking hitch pin that works with a solid ball mount or other hitch accessory. You can use a regular hitch lock and then an anti-rattle device separately. For a lock for a 2 inch Class III trailer hitch you can use…

view full answer...

Answer 2

It sounds like you would like to know the difference between an anti-rattle locking pin like part #63232 and an U-bolt style anti-rattle like part #RM-061 and to be honest they both work well. However, the anti-rattle locking pin does require an…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 10

Thanks for reaching out, Ryan. There are a few differences between the hitches. The B&W hitch part #BW82PR has a slightly higher towing capacity but the ground clearance is less. You will have 11-3/4" ground clearance with the B&W but…

view full answer...

Answer 11

Hey Ryan. The lack of trimming on the B&W Trailer Hitch item #BW82PR compared to the etrailer item #e45ZR does come with a bit of a trade off. The receiver for the B&W item #BW82PR sits lower when installed on your 2025 Kia Telluride…

view full answer...

Answer 12

Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring…

view full answer...

Can I Use an Anti-Rattle Device with the Hitch Cap Sensor # C56UR?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching