Locking Hitch Pin and Anti-Rattle Device for a Solid Shank 2 Inch Hitch Accessory on 2016 Outlander

Updated 02/06/2017 | Published 02/03/2017

Products Featured in This Question

Blue Ox Hitch Receiver Immobilizer II - 2" Hitches

(447)

$62.18

etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome

(3606)

$23.61

Roadmaster Quiet Hitch for 2" Trailer Hitches

(1542)

$39.16

Question:

anti-rattle locking hitch pin for non-hollow application Do you have the above pin that we can use on a solid core hitch adapter. We need to raise our tri-lift and the curt adapter works. However, the shaft is solid and cant use the hitch pin you in the unit for anti-rattle and locking pin. HELP! The adapter fits perfectly on our Mitsubitshi Outlander 2016 and does not interfere with the bumper. We have a Curt hitch and it does extend out enough to allow for the raised adapter. But we cant find an anti-rattle pin that works.

asked by: Don E

Helpful Expert Reply:

There isn't an anti-rattle locking hitch pin that works with a solid ball mount or other hitch accessory. You can use a regular hitch lock and then an anti-rattle device separately. For a lock for a 2 inch Class III trailer hitch you can use # e98880.

For an anti-rattle device you can use # RM-061 which reduces movement vertically. Or you could use # BX88224 which reduces movement vertically and horizontally. I have linked videos of both devices for you.

expert reply by: Michael H