Availability of Straight Air Fitting That Can Fit Top of Firestone Air Bag

Question

Question:

I would like to replace the 90 degree air line connectors that came with the Firestone 2407 air spring kit with straight connectors due to clearance issues with my exhaust. Do you offer a straight connector that will work . Thank you for your help

asked by: Jeff H

0

Expert Reply:

Yes, the # F3454-1 is a straight air tube fitting that fits the top of the Firestone air bag of the # F2407 that you referenced.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Answer 4

Hey Jenna, welcome back! To add a set of 5th wheel rails to your 2025 Chevy Silverado 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2505. This set of rails are industry standard and are definitely compatible with…

view full answer...

Answer 5

While we do not have the technical drawings of the Firestone Heavy Duty Air Compressor #F9499 I can tell you the dimensions. This unit measures 8" long, 3.94" wide, is 6.3" tall, and has a maximum PSI of 150 PSI. Additionally, this…

view full answer...

Answer 6

For compatible quad steps for the bracket width you gave of 27-1/4 inches apart, we have the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-7/16" Base - 350 lbs #TLA8104. This step can be installed using the TorkLift…

view full answer...

Answer 7

Hey Nick! The #TLA8104 you were looking at with a 25-1/2" base is the same as the A8104. The #TLA8004 which is the same as the A8004 has a 27-1/2" base which matches what you heard from TorkLift. Both are designed for an entry height of…

view full answer...

Answer 8

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 9

The Reese model 94622 Goose Box that you referenced has just recently been replaced by the manufacturer with the Reese Goose Box #RP85FR (which features some internal mechanical upgrades). This is a direct replacement and it is designed to fit the…

view full answer...

Answer 10

The air bag in the Reese Goosebox coupler #RP85FR is made by Firestone and uses a standard 1/4-inch Schrader valve. We offer a replacement part #F3032-1.

view full answer...

Availability of Straight Air Fitting That Can Fit Top of Firestone Air Bag

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching