Do You Carry a Replacement Nut and Lock Washer For a Gooseneck Hitch Ball?

Question

Question:

Do you have a replacement nut and lock washer for a 1.5 fine thread gooseneck ball? Thanks

asked by: Keith D

0

Expert Reply:

We only have the nut and washer sold with the hitch ball like the B&W # BWHB94006. This gooseneck ball has a shank 1-1/2" in diameter by 2-3/4" long.

expert reply by: Bud M

0

Answer 1

The B&W 2-5/16" Hitch Ball w/ 2" Rise - 1-1/2" Diameter x 2-3/4" Long Shank - Raw - 30K #BWHB94006 is typically used with a standard 2 5/16 coupler, like the Demco 50-Degree A-Frame Trailer Coupler #12660-97SP for example.…

view full answer...

Answer 2

We have the Brake Shoes #BP04-238 for the Dexter RH Brake Assembly #23-429. We also have the Brake Shoes #BP04-236 if you also need them for the Dexter LH Brake Assembly #23-428

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Do You Carry a Replacement Nut and Lock Washer For a Gooseneck Hitch Ball?

Product Page this Question was Asked From

Continue Researching