MORryde Pin Box Replacement For Lippert Rhino Pin Box

Question

Question:

2021 Jayco fifth wheel camper

asked by: James T

0

Answer 1

Hello Michael, Congrats on the new 5th Wheel! What’s your favorite feature so far? Three words everyone likes to hear: "You are correct." And you are! Your pin box is indeed the Lippert Rhino. I’m not sure why Lippert doesn’t just put that…

view full answer...

Answer 2

Hey, Kenny! The gasket included in the Steel Rubber RV air conditioner rubber gasket kit, part #SR73MR, is 1" tall and 1-1/2" wide. It’s designed to fit the standard 14" x 14" AC opening. Below, you’ll see a picture showing all of…

view full answer...

Answer 3

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 4

The easiest way to identify your MORryde pin box is to locate the pin box model number, which should be written on a label on the pin box. For example, if your MORryde pin box has a part number like MORryde SPB72-1621LD, the 1621 in the number would…

view full answer...

Answer 5

There is an option for a cushioned pin box you can use with your PullRite Super Glide, but based my research there aren't any compatible capture plates for the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and Lippert 1621 HD -…

view full answer...

Answer 6

Hey JP, it looks like the Replacement Gasket and Shim Kit for Furrion RV Air Conditioners #FR78NR is not going to work with your Dometic because this gasket is deigned to be used with Furrion ACs. Instead, you'd want to use the Steele Rubber RV…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 12

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

MORryde Pin Box Replacement For Lippert Rhino Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching