Video Transcript for Review of MORryde Replacement number 5 Rubber Shear Spring - MR85UR

Hi, everyone Steve here with etrailer.com. Today, we're looking at the replacement number five rubber shear spring for your Mor/Ryde rubber pins boxes rated from 14,000 to 18,000 pound trailers. So folks, this replaces that number five rubber shear spring on your Mor/Ryde rubber pin box for trailers between 14,001 pounds all the way up to 18,000 pounds gross vehicle weight rating. What this does is it dampens the road shock, the vibration and reduces chucking and it installs on the skid plate pad with your existing hardware. Now again, this is a direct replacement on those particular boxes, there's a lot of different pin boxes numbers by Mor/Ryde you can find them on the product page. But that being said, I will give you some dimensions real quick, if that helps you match it up, as well.

Keep in mind there's steel under here, it's been coated with the rubber. So when I measure just the steel part I got about 12 inches long overall. Six and 1/2 inches this way, again just the metal part. And on center the bolt short ways. I got it here at five and 3/4, center to center.

And when I do center to center longways, the bolts are right at 11 inches on center. So again, a direct replacement part by Mor/Ryde so you can be sure it's got the quality and it's gonna fit that pin box numbers on our product page that it says it's gonna fit. And that's gonna wrap it up, folks. I'm Steven, thanks for watching. As always stay safe while you're towing.

Have a good one.