Hitch Receiver for a 2022 Acura RDX w/ an 18 Inch Spare Tire

Question

Question:

I am looking for a trailer hitch for my 2022 Acura RDX. I have heard there are problems with the spare tire not fitting underneath once the hitch is installed. I have the small tire I believe it is 18" will this hitch work with my Acura? Draw-Tite Max-Frame Trailer Hitch Item # 76268. If not is there another hitch that will. I am just going to be using it to haul my Kuat bike rack.

asked by: Nate

0

Expert Reply:

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76268 does fit your 2022 Acura RDX. This hitch is custom fit and bolts directly to your Acura with included hardware. Since you have the 18' spare tire you will have no problems with this hitch. The issue comes from the RDX's with the larger spare tires. Yours will fit neatly back where it sits now once the hitch is installed.

expert reply by: Jerred H

0

Answer 1

Hey Casey, thanks for reaching out! We do have a roof rack system that has a lot of crossover between the kits that fit your 2020 Honda CR-V and 2022 Acura RDX. What you'll need is the full Rhino-Rack Kit #RR65VE for your CR-V and then to get…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Hitch Receiver for a 2022 Acura RDX w/ an 18 Inch Spare Tire

Continue Researching