To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Ratings & Reviews
We had the challenge of how to carry 2 kayaks this summer in addition to hauling a 30 foot gooseneck horse trailer. We have F450 crew cab with custom truck bed. We hoped to use the "head ache" bar on the truck bed to support the rear sets of Swagman Rincon supports and purchased a single Rhino Vortex bar for the forward sets on top of the cab. We have 10.5 and 12 foot kayaks and this looks to be an excellent solution. The kayaks are clear of the gooseneck trailer even in a "jackknife" position. Please note the truck bed is extra long therefore there is plenty of room forward the nose of the trailer. We have not hauled yet but will convey any issues if there are any. eTrailer tech support was excellent. Product shipped as projected. Installation took approximatly 3 hours.
I bought the roof rack to carry kayaks back and forth from Pennsylvania to Florida. The rack is solid and performs that task very well. My plan was to take the rack off and on but I decided to just leave it on. I do notice some wind noise since I've added the rack but it does not distract me and I would say that it is not excessive but it is noticeable.
I did have problems during the installation. I mounted the racks on a Ford 250 super duty. And the instructions were very clear as to where the feet that's support the rack where to be installed. Plastic strips are cut and the feet that support the rack on the roof push up to the cut plastic strips and that is what determines placement. I read the instructions several times and had seen an installation on another truck owned by a friend of mine. When I pushed the feet to the proper position I could not attached the clamps from the rack feet to the rain gutter on the truck which holds the whole assembly on the roof. They were too short. I spoke to Etrailer and a consensus was that I had cut the strips correctly. Etrailer's input of course was over the phone and they could not actually see or measure anything that I did. Nevertheless, in order to install the rack I had to move the feet on each side a bit closer to the rain gutter on the truck. I did not think that this would make any difference and based on the performance I have not noticed any problems. I would have given this product and excellent rating if I did not have to deal with the little problem that I had with the fit. As I said I have not taken it off the roof and I reach up and check it now and then and it's as solid as the day I put it on.
This review covers the Rhino Rack 2500 Vortex Aero crossbars and associated parts (DK284, RRRLKVA, RRVA137S-2) for a naked roof installation on a 2018 Honda CR-V.
Very solid racks. We just took our first trip using them and the didn't budge. As recommended, a few days after installing, I tightened the bolts a bit. I'm not sure they needed it--just a little insurance.
The installation process was clear, but fairly detailed. It would be easy to miss a step, so take your time. Also, I tried a couple shortcuts in the order when installing on the car, but had to back track. So, go in the order they give you.
The racks easily supported our filled "pod" and a couple surfboards, strapped side-by-side. Sorry, no photos of the rack loaded. One thing to watch out for is that our old Thule pod almost didn't fit because of the thickness of the racks. I had to loosen the bolts almost entirely.
Of note: I feel that although I followed the measurements to the millimeter, the fit on our 2018 Honda CR-V wasn't exact. Where the pads sit on the roof of the car didn't align perfectly. I could have adjusted this by just re-trimming the rubber pads that go in the channels, but it's not a big deal, so I just left it.
Finally, I do have one concern. The angle of final installation doesn't really protect the racks from theft very well. The plastic plate that locks over the screw would allow someone with the proper tool to get up under it and loosen the bolts. That being said, someone so inclined could also just break the little plastic door or drill a hole in it to access the bolt. So, I guess it's just a deterrent anyway.
Overall, I'm very happy with the racks and etrailer.com! Despite shipping delays due to Covid-19, they were able to get the racks to me in time for an upcoming trip. I did choose to expedite shipping, but the cost was very reasonable.
Fits well. Using RhinoRack system for ladders. Residential Light Construction. I made my own air deflector.lol
Solid all around and easy to mount. This was a good choice for my needs.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
I'm very happy that Rhino Rack builds roof racks to accommodate a large variety of vehicles. Trying to fit a rack to my 22-year-old Chevy pickup with a naked roof was a challenge. Fortunately, the people at etrailer are extremely knowledgeable and were able to get a direct fit. The rack fits awesome and will help in an upcoming road trip. Thanks Alex and etrailer team.
I couldn't find a rack to fit my car anywhere, I have been looking for years and just found Rhino rack on the Internet a few weeks ago.
The Rhino rack for my Toyota Camry is perfect! Easy to assemble, good quality parts, fits really well. Can't wait to get my canoe out on a lake thanks finally to this rack!!
Well made product! Easy fit!
Very easy to install...
Fast and easy to install.. Excellent
Shipping was fast and communication was excellent.
Will definitely shop here again.
Thank you for you fine service.
Arrived when promised. Although one of the boxes was broken open in shipping, everything was undamaged and complete. Slow and methodical assembly resulted in straight forward installation.
Just received product. Relatively easy to follow instructions. Product seems sturdy and quality built. Will use for transport of various recreational equipment ( bicycles, canoe, fishing gear, snow ski's, etc.) ), as well as larger products when/where applicable. Overall very happy .
It works well on my RDX and I love it. The only thing is that due to it is some seam space between window and the roof, you will hear some wind noise but that is common for this kind of fit kit for naked roof.
Purchase a roof rack system for my 2016 Acura RDX. Great product. Easy install and removal. I remove it to save gas and keep it away from elements when not in use. My only complaint is that it came with white marker stickers for your door jams. My car is white. I used a Sharpie covered with clear Scotch tape instead.
This Rhino Roof Rack went together easily & fit perfectly on my 2017 Acura RDX and after a year of using to transport kayaks, I highly recommend & will definitely buy again (from eTrailer!)
Easy installation ! Very well explained . Works great with my Basket.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Romeo S.
4/2/2018
Its spring time and I have been been utilizing my bars very often.The roof rack has been and incredible tool for me moving my kids to camps and into there college dorms.Thanks again!