Best Timbren Suspension Enhancement For 2020 Ford F-250 Super Duty Towing Gooseneck Trailer

Question

Question:

i have a 2020 f-250 superduty crew cab short bed and i pull a 12,500 lb gooseneck trailer-. Which suspension enhancement is best for this, the 350j or 250 sdj?

asked by: Don D

1

Helpful Expert Reply:

Good question, and I can help you out with the best option for Timbrens for your 2020 Ford F-250 for towing your gooseneck trailer, which are the 250SDJ:

- Timbren Suspension Enhancement System # TFR250SDJ

The reason why the # TFR250SDJ are the best option for your F-250 is because they are designed for your application, which is to add support to your truck as you are towing, and are double-convoluted, so they won't affect the comfort of your ride;

On the other hand, the Timbren # TFRTT350J are designed for service vehicles, or if you use a slide-in camper with constant weight. They are single-convoluted, which means they are more aggressive, stiffer, and will make the ride of your F-250 less comfortable. The Timbrens are a really smart choice for your F-250 to improve your truck's handling and performance when you are towing because they take the brunt of the weight and help level and stabilize your truck, just make sure to go with the best kit, the Timbren Suspension Enhancement System # TFR250SDJ.

expert reply by: Kyle S

1

Answer 1

There are two Timbren kits that fit your 2020 Ford F-250 we have the #TFR250SDJ which has an 8,600 pound capacity and fits 2- and 4-wheel drive models. And second we have #TFRTT350J which is rated for 8,000 pounds and also fits 2- and 4-wheel drive…

view full answer...

Answer 2

We have two Timbren rear suspension kits that fit your 2020 Ford F-250 we have the standard duty #TFRTT350J which has a spring height of 3-9/16 inch and a bracket height of 2-3/8 inches. The severe duty #TFR250SDJ is 3-5/8 inches tall and has the…

view full answer...

Answer 3

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Best Timbren Suspension Enhancement For 2020 Ford F-250 Super Duty Towing Gooseneck Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching