bing tracking image

SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SSR-127-54 Review

content loading

Customers compare SSR-127-54 to these similar products

Products Featured in this Video

Review of SuperSprings Vehicle Suspension SSR-127-54

Today we'll take a look at the SumoSprings Solo Custom Helper Springs for the rear axle. Now this is a custom fit part, it is designed to fit the 2017 Ford F250 and F350 Super Duty trucks and on a custom fit part I always like to recommend for you to go to our website, use our fit guide, put in your year model vehicle and it'll show if this will work for your application. Now these helper springs will upgrade your vehicle's rear suspension for improved driver control and comfort. Keeps your vehicle level when you're towing or hauling a heavy load, helps to absorb any bumps and shocks and help minimize sway. It does give you progressive load control, basically the springs will compress according to the weight of your cargo. Now, lighter loads the spring could press very easily at first for a nice soft engagement and a less bumpy ride, and then on a heavier load the springs will compress by as much as 80% for support. These springs do work independently from each other to compensate for off-center loads and reduce body roll during sharp turns. Made of a nice durable high density micro cellular urethane, they are designed to work in temperatures from a negative 25 degrees Fahrenheit up to 200 degrees Fahrenheit.

They do resist damage that can be caused by oils, road salts, and UV rays. It does give you minimal lateral expansion, basically the springs will compress vertically instead of to the side so they aren't easily damaged when operating in tight spaces. They are maintenance-free, there's no tubing to run or air pressure to monitor like with air springs. It is a simple no-drill installation. This does include the two inaudible 00:01:23 style springs. These parts are made in the USA.

Now, this does include everything shown here on the table, the two springs, the larger spacers, the smaller spacers, and a nice set of detailed instructions on how to install everything. Few specs on this, the weight capacity at 50% compression is 2,800 pounds and one last note is the SumoSprings will not increase your vehicle's weight carrying capacity. But that should do it for the review on the SumoSprings Solo Custom Helper Springs for the rear axle.

Questions and Comments about this Video

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.