Fan-Tastic Vent 6504 Replacement Controller

Question

Question:

I need a 414 vertical surface mount digital controller for my fan Help???? Thank you

asked by: Phil S

0

Expert Reply:

We've checked with Fan-Tastic in the past and they have told us that for the 6504 that you have the correct replacement controller is the part # FV9068-81.

expert reply by: Jameson C

0

Answer 1

The correct replacement wall controller for the Fantastic Vent 6504/414 Vent Fan is the Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan part #FV9068-81.

view full answer...

Answer 2

If your older remote looks like what is in the picture I attached the part #FV9068-81 would work as a replacement according to Fan-Tastic Vents but you will need to program it. To program hold your remote 12 inches away from the fan while holding…

view full answer...

Answer 3

I do have a solution for you that doesn't involve replacing your entire unit, but the Fan-Tastic Vent Roof Vent #FV803350, does not have a receiver built into it, so it doesn't have the option to operate through a remote. Therefore, using its…

view full answer...

Answer 4

I suggest you use a circuit tester such as the #PTW2993 or a multi meter to identify the wires in your Jeep's circuit. Please see the attached link to installation instructions video that will provide visual guidance to installation of the Blue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Fan-Tastic Vent 6504 Replacement Controller

Product Page this Question was Asked From

Continue Researching