Trailer Hitch that Fits 2022 Hyundai Kona N Line AWD

Question

Question:

I’m looking for a mount hitch for my 2022 Hyundai Kona N Line AWD. Do you have any? If so what’s the part number? Thanks

asked by: Jigger

0

Expert Reply:

The Curt hitch part # C87DR fits the N models of the 2022 Hyundai Kona.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Hi Natalie, Definitely smart to check, and the correct trailer hitch for your 2023 Hyundai Kona Limited is the Curt Trailer Hitch Receiver #C87DR. I went ahead and double-checked with the manufacturer for you just to make sure.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Roadmaster EZ Base Plate Kit, #521877-1, is specifically designed to be used with the removable arms that come with it in order to flat tow the vehicle behind a motor home so a bike rack will not fit. For your 2009 Mini Cooper S, I recommend the…

view full answer...

Answer 4

Since your 2022 Hyundai Kona N is going to have LED tail lights you are going to need the Tekonsha 4-way #TK63CR. The Curt #C53ZV is not compatible with the LED tail lights.

view full answer...

Answer 5

For your 2022 Hyundai Kona, I recommend the Draw-Tite Trailer Hitch Receiver #DT52GR. This hitch is a class 3 and is rated for 2,000 lbs maximum towing capacity and a maximum tongue weight of 300 lbs.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 10

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Trailer Hitch that Fits 2022 Hyundai Kona N Line AWD

Continue Researching