Which 7-Pin Wiring Extension Works with this Reese Hitch Box Extension # RP45292?

Question

Question:

The Reese extension has a place to put a 7-pin wiring connector. Id like to go from 7-pin flat on my truck to 7-pin flat on this connector but I dont see Reese makes one for that. Can I get a TorkLift Wiring Harness Extension? They say they are meant for SuperTruss or Cannon Hitch Extender and dont list Reese.

asked by: Matt R

0

Expert Reply:

Yes, you can use either the 28" TorkLift Wiring Harness Extension # TLW6028 or 36" TorkLift Wiring Harness Extension # TLW6036 with the Reese Hitch Box Extension and Reducer # RP45292. These will allow you to plug into the 7-way on your truck and go back to the mount on the Extension.

If you have a Slide In Camper that needs to connect to the 7-Way as well the 21"-28" TorkLift Wiring Extension # TLW6524 or 32"-36" TorkLift Wiring Extension # TLW6532 can be used as it has a 2nd port for the camper to connect.

expert reply by: Bud M

0

Answer 1

To keep the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long #RP45292 you were looking at from having movement I recommend adding the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062 which…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Which 7-Pin Wiring Extension Works with this Reese Hitch Box Extension # RP45292?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching