The Low-Down on the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" Video

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

Thanks for the pictures! I would be happy to help you. Since you have already gone through the recommend troubleshooting steps and verified it is not a wiring issue I think its safe to say the actuator is the problem. Carlisle's troubleshooting…

For a hitch extension that long you'd have to have a 2-1/2 inch hitch installed on your 2005 GMC Sierra 2500 like the Curt part #C15703 which is a confirmed fit. Once that's installed you'd be able to use a longer extension like the part…

First, thanks for the kind words! And even with the SumoSprings Solo Custom Helper Springs #SSR-114-47 on your 2016 Ford F-250, you can still absolutely use the SuperSway Stops on your truck, with their part number being the following: - SuperSprings…

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

The Titan hitch extender #RP45018 does have a slight bend in it closer to the receiver end. This is to help compensate for any sag caused by the length and weight of the extender so there basically won't be a difference in height between the…

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

Hey Kyle, so I checked with Torklift and we actually have the numbers wrong on the 21 inch version. The #TL46CR is actually rated for 550 lb tongue weight and 5,500 lb total trailer weight.

If your 2003 Dodge Ram 2500 has a factory hitch that has an opening that measures 2-1/2 inch by 2-1/2 inches the Curt hitch extender part #C45048 will simply just slide into it. The 2-1/2 inch hitch size is pretty common on newer heavy duty trucks…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

Correct, the TorkLift SuperHitch Magnum Trailer Hitch Receiver part #TL74FR which is a fit for 2021 GMC Sierra 3500 does require the bolts to the bed be loosened. That said, it actually is not that bad. They won't be removed fully either. I have…