How to Determine Which 4-Way Trailer Wiring Harness Is Needed On a 2022 Acura RDX?

Question

Question:

I see that there are multiple wiring harnesses available for my 2022 Acura RDX. How do I find out if I have the 12-Volt Power Provision?

asked by: Felix

0

Expert Reply:

To determine if your 2022 Acura RDX has the 12-Volt Power Provision you will need to access the 8-pin connector inside your Acura to see if it has 2 red wires in the factory side of the connector. This connector is located on the drivers side above the rear portion on the rear fender(see image).

If you only have one wire you do not have the provision and will need the Tekonsha T-One Vehicle Wiring Harness # 118804.

If your connector has 2 red wires you do have the provision and will need the Tekonsha T-One Vehicle Wiring Harness # 118800.

expert reply by: Bud M

0

2020 Acura RDX Trailer Wire Harness Connector
(click to enlarge)

Answer 1

Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item #e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

How to Determine Which 4-Way Trailer Wiring Harness Is Needed On a 2022 Acura RDX?

Featured Help Information

Miscellaneous Media

Continue Researching