Can The Bolt Trailer Hitch Receiver Lock Be Keyed To The Glove Box Key On a 2015 Ford F-150 Keyless?

Question

Question:

My F-150 2015 has keyless ignition. I do have key for glove box and center console. Will this work with glove box key?

asked by: Jim C

1

Helpful Expert Reply:

Yes, the BOLT Trailer Hitch Receiver Lock # BL7023585 will key to your glove box key for your 2015 Ford F-150. This is actually the preferred key to use with the lock as the key that is built into the key fob can occasionally be difficult to use especially the first time the key is programmed.

expert reply by: Bud M

1

Answer 1

The pin length on BOLT lock #BL7023585 won't be long enough for a 3 inch trailer hitch. Right now they do not make one that will be long enough but who knows what the future holds. If the 3 inch hitches take off in popularity then we might see…

view full answer...

Answer 2

Yes, the Draw-Tite Ball Mount for 3" Hitches #40701 will fit your 2021 Ford F-250 with the 3" receiver. The ball mount has a 6" drop or 4" rise depending on how you place it in the receiver. You will need a hitch ball with a…

view full answer...

Answer 3

Thanks for the picture! Yes, the BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - Ford Side-Cut Key item #BL7023585 will work with your key fob. This system is confirmed to fit your 2019 Ford F-250 Super Duty's key.…

view full answer...

Answer 4

The BOLT Trailer Hitch Receiver Lock #BL7023585 is capable of fitting the 3" receiver hitch. I have included the measurements below if you would like to confirm those with your hitch on your 2021 Ford F-350. There are also many reviews on our…

view full answer...

Answer 5

Yes the Bolt hitch lock part #BL7023585 does fit your 2020 Ford F-350. If you are unsure then you can check the attached picture that shows all of the key styles it fits.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hi Peter! The Soft Start Kit for Coleman-Mach RV Air Conditioners #CM56RR is what you need. This is designed to fit Coleman-Mach Series 45000, 47000, and 48000 AC units. The 48204-669 you have falls under the 48000 so they are compatible. Where are…

view full answer...

Answer 10

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Answer 11

Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness #C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will…

view full answer...

Can The Bolt Trailer Hitch Receiver Lock Be Keyed To The Glove Box Key On a 2015 Ford F-150 Keyless?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching