Trailer Hitch Fits Recommended for 2013 Subaru Crosstrek

Question

Question:

Do you have a trailer hitch for a 2013 Subaru cross trek?

asked by: Nick A

0

Expert Reply:

We do indeed offer hitch fit options for the 2013 Subaru Crosstrek.

If your Crosstrek is equipped with the knock-out panel in the rear bumper panel, and you'd like a partially concealed hitch that mounts behind the bumper with only the receiver tube and safety chain loops being visible, I'd recommend the EcoHitch # 306-X7203. This hitch only works on Crosstrek models with the bumper knock-out panel.

If you'd like a standard, fully visible hitch, I'd recommend the etrailer brand Class III hitch, part # e98838. If a visible hitch doesn't bother you, this option is quite a bit less expensive. I've provided a side by side photo showing what each hitch looks like once its installed.

If you'll be towing with the hitch, you'll need a few other items to complete your towing setup. For a trailer wiring harness, use # 118467. If you go with the etrailer brand hitch, use the # D-28 ball mount along with the # PC3 hitch pin. If you go with the EcoHitch model, use # 2753 which includes the hitch pin. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball.

I've linked to some installation videos that you might find helpful.

expert reply by: Mike L

0

Installed Appearane of EcoHitch 306-X7203 and etrailer Brand e98838 Trailer Hitch for 2013 Subaru Crosstrek
(click to enlarge)

Answer 1

The EcoHitch part #306-X7203 is designed to be completely hidden behind the knockout plate so you don't have to see an unsightly crosstube underneath your vehicle. I attached a picture that I took from an install video that shows the cover…

view full answer...

Answer 2

I believe I have found the replacement wheel you are looking for. It's kind of hard to see in our product pictures but the Dexstar Steel Mini Mod Wheel part #AM20443 has a sticker on it that reads 17-231 and is a 15 inch diameter wheel with a 5…

view full answer...

Answer 3

We do offer three choices in a 2-inch Class III trailer hitch receiver for your 2012 Audi Q5 S-Line Edition, viewable on the included link, and among these is the Curt #C13136 that you referenced. All three hitches' installation will require…

view full answer...

Answer 4

We carry replacements that could integrate into your Dometic AC system, but before purchasing anything you'll need to remove the cover of your air distribution box under the unit you're wanting to replace and look for the wire harness that…

view full answer...

Answer 5

While we are able to ship you 3 of the Master lock #ML377KA that will use the same key, we are not able to guarantee any specific key code. So will you get 3 keyed alike locks? Yes. Will they have the 0370 Key? Probably not.

view full answer...

Answer 6

I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

Kia Tellurides are in our install shop all the time for hitch and wiring installs since Kia typically will not install them at the factory. Manufacturers use "tow package" as a buzz word to charge you more typically so you'll want to…

view full answer...

Answer 9

The etrailer.com #e98838 will definitely fit your 2014 Subaru XV Crosstrek Hybrid. Though we have not done an install on a 2014 as of yet, I did include an install video we did on a 2015 for you to check out.

view full answer...