Do You Have To Remove The Solera Slide Topper To Replace The Idler Head On The Roller Tube?
Published 11/19/2021
Products Featured in This Question
Question:
Does the entire slide topper need to be removed to replace this part? Or can I just unscrew the end from the tube, slide the old one out and new one in? If the pin holding the shaft in the end bracket sheared off, does that release the spring tension? Thank you
asked by: Gene
Expert Reply:
You do not have to remove the entire slide topper to be able to replace the Idler Head and Roll Tube # LC87FR for your Solera slide topper. A second person will be able to support the weight of the tube and fabric in place while the assembly is replaced. Depending on the height of your toppers and the working platform you have it may be safer to pull the entire assembly since you will have small hardware that needs to be removed and installed.
If you are removing the Idler Head # LC87FR only it will not release the spring tension in the Drive Head # LC34FR. The roll pin that holds the shaft on the mounting arm will release the tension on the spring according to Lippert. If there is corrosion inside there it may still lock the shaft in place.
Product Page this Question was Asked From
Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Accessories and Parts
- RV Awnings
- Head Parts
- Rollbars
- Head Assembly - Manual
- Solera Replacement
- Idler Head
- Black
- Lippert
more information >
Continue Researching
- Shop: Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Shop: Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
- Video: Hands-On with the Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings
- Shop: Towing Mirrors
- Video: Feature Review Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings
- Search Results: fifth wheel king pin stabilizer
- Shop: K-Source Custom Towing Mirror - Manual - Textured Black - Driver Side
- Shop: Replacement Idler Head for Solera 5000 Series Slide Toppers - Black
- Q&A: Instructions For Replacing Drive Head and Idler Head On a Solera Slide Out Topper Awning
- Q&A: Parts Needed To Install Solera Awning Fabric On Slide-Out
- Q&A: Replacement Bracket for Solera Slide Topper Drive Head
- Video: Replacement Extension Rod for pre-2022 Solera RV Slide-Out Awning: The Breakdown
- Q&A: Replacement Black Solera Slide Topper Awning Drive and Idler Heads With Arms Attached
- Q&A: Replacement Drive Head And Roll Tube Assembly For Lippert Solera Awning
- Search Results: spare tire carrier
- Q&A: How Many Times Does A Solera Slide Out Awning Roller Need To Be Turned To Set Tension
- Q&A: How Many Times Does Solera Slide Topper Need to be Wound
- Shop: Replacement Mirrors
- Video: Replacement Drive Head Pin for Solera Power RV Awnings: The Breakdown
- Shop: Replacement Drive Head Assembly for Solera Manual Pull-Style Awnings - Black
- Search Results: lc87fr
- Shop: Replacement Extension Rod for pre-2022 Solera RV Slide-Out Awning - Black - Qty 1
- Shop: Replacement Mounting Bracket Kit for Lippert Solera 5000 Series Slide Toppers - Black
- Video: Detailed Breakdown of the Replacement Idler Head Pin for Solera RV Awnings
- Video: In-Depth Review of the Lippert Anti-Billowing Kit for Solera Slide-Out Awnings
- Search Results: rv shower drain