bing tracking image
Customer Service My Orders
  1. Accessories and Parts
  2. Lippert
  3. RV Awning
  4. Head Parts
  5. Rollbars
  6. Head Assembly - Manual
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
Add to Cart
Lippert

Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black

Part Number: LC34FR
120 Reviews | 26 Questions
In Stock
$106.53
Retail:$113.37
You Save: $6.84
 Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

3d view icon
lippert accessories and parts rv awning head assembly - manual lc34fr
lippert accessories and parts rv awning head rollbars
lippert accessories and parts rv awning head rollbars replacement right-side roll bar for solera slide-out awnings - black
lippert accessories and parts rv awning drive head replacement right-side roll bar for solera slide-out awnings - black
lippert accessories and parts rv awning head assembly - manual replacement right-side roll bar for solera slide-out awnings black
lippert accessories and parts head rollbars assembly - manual lc34fr

Show All (7) Product Images

Show Fewer Product Images

Customer Photos

Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo
Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black customer photo

Show All (8) Customer Images

Show Fewer Customer Images

Videos

Show All (1) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
Replace the head and roll bar on the right side of your Solera slide-topper awning. 1-800-940-8924 to order Lippert accessories and parts part number LC34FR or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (120)
  • Q & A (0)
  • Related Parts
  • Videos (1)
  • Photos

Lippert Accessories and Parts - LC34FR

  • RV Awning
  • Head Parts
  • Rollbars
  • Head Assembly - Manual
  • Lippert
  • Drive Head
  • Solera Replacement

Replace the head and roll bar on the right side of your Solera slide-topper awning.


Features:

  • Replaces the right-side head and roll bar for your Solera RV slide-out awning
    • The right-side head is also known as the drive head
  • Black color


Fits:

  • All Solera RV slide-out awnings


285149 Replacement Drive Head and Roll Tube for Lippert Solera Slide-Topper - Black







Customers Who Purchased This Accessories and Parts Also Bought...



Video of Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hands-On with the Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings

Hi, everybody, Andy here with etrailer.com and today we're gonna take a look at this replacement drive head and roll bar for the Solera RV slide-out awning. This is going to replace the drive head and roll bar for your Solera RV slide-out awning. If you are facing your awning, the drive head is on the right side. And if you need the idler head I am including our item number on your screen for the replacement left side or idler head and roll bar for Solera RV slide-out awnings. Just take that item number that you see there on your screen, put it in the search field of our website, and it will take you to that. Now, since this is a Lippert components product, it's going to be the exact same as your original.

So what's nice is you're not gonna have to worry about fit issues. It's going to be the same quality, the same fit, as the original and this is going to fit all Solera RV slide-out awnings. This is made here in the USA and as you can see it as a black color so it's going to blend in well with the slide-out awning that you currently have. Now, keep in mind, this is spring-loaded, obviously, so you wanna be careful when you are removing your old one and installing this new one. It is possible that it could be under some pressure so you wanna make sure that you are supporting it so that you don't potentially get injured while you are installing this.

Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..

Customer Satisfaction Score:

Ratings & Reviews

4.7

120 reviews
5 Stars
(100)
4 Stars
(10)
3 Stars
(6)
2 Stars
(0)
1 Star
(4)
Review Sort Icon
by:
Lauren was awesome she is very knowledgeable and helpful. The parts were perfect because of Lauren's help. etrailer.com is now my place to go for parts. I will tell everyone I can how fantastic you folks are. Thank you so much. You have one very happy customer. Don't loose Lauren.
Brooke M. profile picture
Etrailer Expert

Brooke M.

4/23/2025

We are hanging on to her with both hands! haha I'll make sure she sees your review too. :)

Robert M. profile picture

Robert M.

4/23/2026

Excellent, couldnt be happier,

Lazer S. profile picture
Etrailer Expert

Lazer S.

4/23/2026

@RobertM Glad it's still working well for you! What is the next trip you have planned?
by:
The installation of this item was straight forward and didn't cause any real problems. I used the information sent by etrailer and all went according to plan. Thanks for the help!
by:
I just needed the "S" bracket as I broke one. Would be nice to be able to buy just the bracket.
Brian profile picture

Brian

4/8/2026

So far, so good. Its a pot metal bracket end. Only a matter of time before another one breaks. There is a lot of tension on the slide out awnings when extended. Need to make a stronger solid one. Fairly easy to change out. Just be careful with the spring.

by:
Exact replacement.
The posted link to the installation directions didn't go anywhere for me.
I pulled slide out about 6" and pre loaded the spring about 5 turns.
Works great!!
Customer Large Image
Customer Image
Click to Enlarge
David A. profile picture

David A.

5/22/2024

After a year, this exact replacement part continues to work as intended.

by:
The right-hand slide head and roller set #LC34FR fit my 2014 Itasca Sunstar fine. I would have given it 5 stars if it would have included the rivets to connect the head roller to the bracket that attaches to the rv and instructions on many turs to per load the spring, but on a good note the slide now works as it should.
by:
The part showed up on time and well package. No instructions (as expected) and Lippert Cmpts manuals don't cover a drive or idler bar. The original part was only 6 yrs old and the shaft sheared in right hand bracket/holder. Replacement was straightforward - with the slideout fully pulled in, it was just a matter of removing the bracket bar and end piece (as the shaft broke there are no concerns with spring tension) and then removing the end cap (3 screws), pulling it off and exposing the hollow roll tube. The broken bar and spring had slide forward in the tube so it had to be fished out. Installing the new drive bar/spring is basically the reverse procedure. Make sure you align one of the spiders on the far end of the shaft/bar with the round channel inside the tube. If you are any bit at all mechanically inclined, it is easy to figure out.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
It was a perfect replacement for my A & E slide topper. Thank you so much.
by:
Great product easy to install and a great price
by:
Easy diy job and great service from etrailer. I only needed the bracket. Please sell the brackets individually. Thx
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
Amazing customer service and the right parts very quickly! Will use them again !!
by:
Worked and fit perfectly
by:
It’s the exact replacement, don’t have time right now to install them but I will sometime this winter down in Florida
Thomas F. profile picture

Thomas F.

9/21/2025

Works very well actually, nice and smooth and quiet operation when moving slides in and out. Should have replaced them a lot sooner than I did.

by:
I got my shipment very quickly which was great for our 1st of the year camping trip coming soon. Install was pretty straight forward. Instead of having the awning out at 5 to 6 inches for the install and turning clockwise 14 turns, I put it all the way out and did 14 turns counterclockwise. Install took me about an hour.
Jason profile picture

Jason

4/22/2025

So far so good. No issues to report. Love that E-trailer does follow ups.

by:
Part fit perfectly. Removal of the old and installation of the new part was straight forward. Would have be nice to have some instructions. Had to figure out if the torsion spring would be under tension or not. If the slide is in there is no tension on the spring. That's how I made the change. It took about 30 to 45 minutes.
by:
Needed some new screws
Everything else nice product
by:
Very easy replacement.
by:
The part fit like it should,however there were no install instructions,and I called in and there was insufficient help.
by:
Had it for a year still working ! Easy repair to slide out cove, after the spring broke.
by:
Perfect replacement fit. A bit louder than the original but not much
by:
looks like a good part
by:
Perfect replacement for my motorhome slide out topper spring assembly. My A&E right topper spring broke, 3108706.171b, and is no longer available. However I took a chance and ordered this Solera spring assembly. Other than being black, it's a perfect replacement for my A&E.
by:
Perfect fit as it replaces the one I broke while passing a tree. Oops!
by:
Quick delivery
by:
Product ship quickly and was packaged safely in a durable box. Very pleased with the transaction.
by:
Good quality
25
120
true
Show More Reviews

See what our Experts say about this Lippert Accessories and Parts

Do you have a question about this Accessories and Part?
  • Replacement Driver Head and Idler Head for Lippert Solera Slide Out Awning
    I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR and the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR. You will want to re-use the hex rods, but you will need to replace the entire roller tube assembly to get the "arms" that are broken on your...
    view full answer...
    Image 1 for
  • Replacement Black Angle Bracket for Solera RV Slide-Out Awnings
    Hey Tony welcome back! That little angle bracket that attaches to the Replacement Extension Rod item # LC3452072 you bought a couple weeks ago is part of the roll bar assembly. You can't just buy the angled bracket and replace it that would be too easy. Which roll bar assembly you need is going to depend on what side needs to be replaced. I listed them below: Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings item # LC87FR Replacement Right-Side Head and Roll Bar...
    view full answer...
  • How Do You Know When Awning Heads Need Replacing
    Hey Greg, is your awning not working well? If so, what's it doing? Typically the heads just don't work as intended so like the drive head stops driving the awning in and out and the idler is getting hung up.
    view full answer...
  • Instructions For Replacing Drive Head and Idler Head On a Solera Slide Out Topper Awning
    For replacing the Drive Head # LC34FR and Idler Head # LC87FR on a Solera Slide Topper you will want to completely remove the slide topper from your RV/Camper. You will need to insert a pin into the end of the tube end cap(see image) to keep the springs wound during removal. Once removed you will want to secure the entire tube while you remove the end cap and count the number of turns and direction the end arm turns. Then you will be able to remove each head assembly by removing the screws...
    view full answer...
    Image 1 for
  • Parts Needed To Install Solera Awning Fabric On Slide-Out
    The Replacement Mounting Hardware part # LC701665 comes with the Extension Rods, Extension Rod Bracket, Torsion Arm Caps, and various hardware. I am not sure what all you have now but it sounds like you might also need the torsion heads, part # LC87FR for the idler side and part # LC34FR for the drive side. These also come with the roll tube as well. I have attached a photo to assist.
    view full answer...
    Image 1 for
  • Replacement End Caps For Lippert Solera 1000 Series Slide Topper Awning
    For the Lippert Solera slide out awning you should have either the White # LCV000163299 or Black # LCV000165061. I'm not sure what company gave you the part number 00-0496 but they should be able to give you the corresponding Lippert part number. Otherwise you will need to locate the tag underneath the fabric near the right side of the fabric. Currently we carry the Replacement Left-Side # LC87FR and Right Side # LC34FR Head and Roll Bar for black Solera RV Slide-Out Awnings. This is...
    view full answer...
  • Replacement Drive Head And Roll Tube Assembly For Lippert Solera Awning
    Thanks for the pictures! It appears you're needing the: -Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning # LC34FR. Since just the hex bracket at the end of the roll tube is not available separately, you'll need to replace the entire drive head and roll tube.
    view full answer...
    Image 1 for
  • How Many Times Does A Solera Slide Out Awning Roller Need To Be Turned To Set Tension
    Lippert recommends to roll the Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings # LC34FR 14 times in order to set the proper tension for the awning.
    view full answer...
  • Replacement Right-Side Head and Roll Bar For a Solera Slide-Out Awning
    Without knowing what slide topper you have, I cannot say with 100% certainty what assembly you need. The odds are good that you have a Solera slide topper and the correct option for the right side would be the Replacement Right-Side Head and Roll Bar # LC34FR which fits all Solera RV slide-out awnings. The # LC87FR you mentioned is for the left side and the # LC79WD is for the Lippert Solera 5000 Series slide topper specifically.
    view full answer...
  • Replacement Parts for RV Slide Topper With Broken Torsion Bar
    The Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR is one of two parts that help retract your awning. The other part is the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR. This is the part that has the spring wrapped around it and sounds like what you are describing. The Spring and Rod are not available independently.
    view full answer...
  • Replacement Bracket for Solera Slide Topper Drive Head
    Thanks for the picture! I just heard back from my rep at Lippert. I have a solution for you but to get the part you broke you will need to purchase the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black item # LC34FR. They don't just sell the end bracket that you broke. This will also come with a replacement roll tube.
    view full answer...
    Image 1 for
  • How Many Times Does Solera Slide Topper Need to be Wound
    The slide out rollers need to be wound 7 full times when they are installed. So if you were to remove yours to replace the head with the # LC34FR you'd need to wind the roller 7 full times.
    view full answer...
  • Do You Have To Remove The Solera Slide Topper To Replace The Idler Head On The Roller Tube?
    You do not have to remove the entire slide topper to be able to replace the Idler Head and Roll Tube # LC87FR for your Solera slide topper. A second person will be able to support the weight of the tube and fabric in place while the assembly is replaced. Depending on the height of your toppers and the working platform you have it may be safer to pull the entire assembly since you will have small hardware that needs to be removed and installed. If you are removing the Idler Head # LC87FR...
    view full answer...
  • Replacement Parts For A 2018 Jayco Precept Motorhome Slide Out Awning
    Jayco tends to use Dometic A&E awnings so you'd most likely have to purchase an entirely new slide topper since we currently only offer Solera branded components. I haven't gotten to work on Dometic awnings so I can't say if it's the same but Solera awning springs can be reset inside of the roller tube to get the tension back. Yours sounds like it might be a bit more broken than just re-tensioning the spring though so you'd like need to replace the arm(s). If you have a Solera model then...
    view full answer...
  • Picking Out Replacement Idler and Drive Head and Tube for Solera Awnings
    We have the replacement drive head and roll tube part # LC34FR and the replacement idler head and roll tube part # LC87FR. If you damaged the drive head and idler head you'd want to match what you order with what you need as the idler setup won't fit both sides. The drive head is what does the actually rolling and the idler basically just free spins.
    view full answer...
  • Replacement Parts For Solera Slide Out Awnings
    If you have an older style Solera awning we currently offer the following replacement components: Replacement Bracket Kit for 2019 - 2022 Solera RV Slide-Out Awnings - Black # LC795354 Replacement Bracket for pre-2019 Solera RV Slide-Out Awnings - Black # LC2724412 Replacement Right-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black # LC34FR Replacement Left-Side Head and Roll Bar for Solera RV Slide-Out Awnings - Black # LC87FR Replacement Extension Rod for pre-2022 Solera...
    view full answer...
  • Replacement Tension Springs For a Slide Topper Awing
    The tension springs for slide toppers are located inside the tube like on a Solera # LC87FR & # LC34FR. These springs are metal and they are manufacturer specific. I would need to know exactly which slide topper you have from Lippert to verify if these are correct for your slide topper. We do not carry parts for Dometic or Carefree slide toppers at this time if you have one of those brands.
    view full answer...
  • Replacement Black Solera Slide Topper Awning Drive and Idler Heads With Arms Attached
    The Replacement Drive Head and Roll Tube # LC34FR is the correct assembly for the right hand side of your Solera Slide topper as you stand facing it from outside the camper. The Replacement Idler Head and Roll Tube # LC87FR is on the left hand side as you face it from outside the camper. Both of these are black in color.
    view full answer...
  • Which Direction to Roll RV Awning When Installing
    When winding an awning you want to wind in the direction that would allow the spring tension to want to pull the awning fabric in. So depending on how you look at the head it could be clockwise or counter-clockwise. So roll the awning like you are rolling it towards the body of the RV since the fabric comes over the top of the roller. 14 rolls is typically gives the best amount of tension.
    view full answer...
  • Replacement Driver and Idler Heads for Solera Slide-Topper Awnings
    For your application you either need the Drive Head # LC34FR or the Idler Head # LC87FR. These come with the roll tube as well. I'm not sure which one you broke but the idler head will be on the left side while the drive head is on the right if that helps at all.
    view full answer...
  • Replacement Drive Head for Solera Slide-Out Topper Awning
    The Replacement Mounting Hardware Kit for Lippert Solera 13-1/2' Slide Topper # LC701665 is the mounting hardware kit for a 13-1/2' Solera Slide Out Topper like the # LCV000168109, so it will only contain the parts you need to mount the topper and not any of the parts that make it function. The # LC701665 kit includes the Replacement Slide-Out Hex Bar Extension Bracket for Solera Slide-Topper Awnings # LC2724412, the Replacement Awning Extension Rod for Solera Slide-Topper Awning # LC2724392...
    view full answer...
  • How Many Times to Roll Solera Slide Topper
    According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like what # LC34FR fits is between 12 to 16 turns, so I'd consider 14 to be a pretty good happy medium.
    view full answer...
  • Replacement Drive Head For Solera Slide Topper Awning
    You are correct that the right side is the drive head side, and we do have a replacement for your Solera slide topper awning so you can make a repair; what you need is the following part: - Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning # LC34FR
    view full answer...
  • Replacement Drive Head for Solera Slide-out Topper
    When looking at your Solera Slideout Topper when looking at the right side, that is the" Drive" side and the "Idler" will be on the left. It sounds like you need the drive head, so you can use the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR.
    view full answer...


< Previous
12
Next >



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Matthew E
Updated by:
Matthew E
Employee Noah M
Updated by:
Noah M
Employee Amanda K
Updated by:
Amanda K
Employee Mike S
Written by:
Mike S
Employee Michael B
Installed by:
Michael B
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!
Call 1-800-940-8924