Trailer Wiring for 2022 Toyota Highlander without Tow Package and Trailer Trailer

Question

Question:

What trailer wiring harness should I get for my 2022 Toyota Highlander? I don't have the tow package as I don't have a hitch.

asked by: Nathan

0

Expert Reply:

Since your 2022 Toyota Highlander does not have the factory tow package the trailer wiring harness you'd want is the Tekonsha part # TK99FR which is the easiest to install and most reliable.

Then for a hitch the Curt # C99FR would be a great option that is mostly hidden and has great towing capacities.

expert reply by: Jameson C

0

Answer 1

If you've securely connected the Tekonsha T-One Wiring #TK74FR to your 2022 Toyota Highlander but you aren't getting any power to the 4-Way then it sounds like your Highlander doesn't have the factory tow package and you needed the T-One…

view full answer...

Answer 2

The pin in the Etrailer Weld-On Swivel Jack, #TJP-2001-B, measures 1/2 inch. The attached photo shows more dimensions of this jack for you to review.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Wiring for 2022 Toyota Highlander without Tow Package and Trailer Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching