Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This TecNiq vertical-mount LED light makes your license plate easy to see and keeps you compliant with FMVSS/DOT requirements. The efficient LED design gives off clear, even white light while drawing just 0.06–0.11 amps at 9–14V DC, so it’s bright without putting a load on your system. Built to perform for over 100,000 hours, it’s a long-term fix for dull or unreliable plate lighting.
No need to worry about rain, road spray, or dunking at the ramp. The polycarbonate lens and TecSeal urethane potting fully protect the internals against dust and water intrusion. With its IP68 rating, this light stays sealed and operational even in harsh or wet conditions, making it a smart choice for tough environments.
Installation is straightforward thanks to the compact 2-hole vertical surface mount setup. The housing projects just 2" from the surface and measures only 2-1/4" wide by 1" tall by 3/4" deep, so it fits neatly on small or tight spaces. The included 9" 2-wire pigtail (black for power, white for ground) keeps wiring quick and uncomplicated.
The sealed polycarbonate lens protects against cracks and discoloration, while the black housing keeps its look over time. Whether it’s sun exposure, vibration from travel, or moisture from the road, this lamp is built to handle it all without fading or failing.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look at this TecNiq License Plate Lamp. Now, you're gonna be able to keep your license plate clearly visible and DoT-compliant with this compact vertical-mount LED light. This is designed for trailers, RVs, and utility vehicles. This is going to give you powerful illumination in a small, durable package that's built to last. Now, this LED license plate light does meet the Federal Motor Vehicle Safety Standards and Department of Transportation Visibility Standards, and it does feature this vertical mount design that's going to fit easily on recessed or shallow surfaces.
And the rugged polycarbonate housing's going to extend just about two inches from the mounting surface, and it's completely sealed to resist impact, UV damage and moisture. And lemme go ahead and I'm gonna zoom out here real quick, and I'm gonna get my etrailer license plate here, try to make this as real as possible, and turn my studio lights off here. So, you can see with my lights off, and it is dark in my studio, just how bright this light is, and how effective it's gonna be, especially at a distance where you're gonna be able to see your license plate. I'm gonna go in for a closeup here, and just bring this into frame there for the closeup so you can get a better view of it. So, inside it has a textile urethane potting, so that's gonna protect the circuitry while an IP 68 rating's going to ensure total protection against dust and water.
Installation's gonna be pretty simple. I'm gonna go ahead and unplug, or disconnect this rather, from my power source here. This has a standard two wire hookup. The pigtail lead is, let me confirm that measurement here with you on camera. See if I can bring that up there into frame.
So the pigtail lead is almost, I'm gonna call it at what, eight and a quarter or so. So about eight and a quarter inches long. So once installed, you're gonna be able to count on over 100,000 hours of dependable performance. So two hole installation with the light, the housing is black, and just some measurements here off the cuff. So let's call this the overall length.
Pretty close to right about two and a half inches just end to end like that. And then the depth might be tricky to show you. About an inch. Height, about three quarters of an inch. So hopefully all those measurements are helpful for you. If you have any questions, whether it's about this light or anything else that we carry here at etrailer, don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well, again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Exactly what I ordered and quality looks good
Feels well built.
Perfect for relocating a boat trailer l ight.
100% what i wanted fast shipping and as always great customer svc
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
8/14/2026
Thanks for the kind words Alan! Happy to hear we were able to get you what you needed!