Recommendations For Repairing Or Replacing An Older Stallion Jack

Published 11/11/2021

Products Featured in This Question

Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K

(242)

$80.42

Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity

(79)

$795.83

Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 12,500 lbs

(286)

$273.96

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

(202)

$785.81

Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs

(267)

$1050.55

Question:

Hello, I have an older square tube Stallion jack on a horse trailer, are there any electric motor conversions available for the Stallion brand jacks or possibly a universal kit? What information would I need from the jack to determine fit square tube dimensions, shaft diameter ? Thanks

asked by: James H

Expert Reply:

I may have a different solution for you, but there will not be a universal kit to add a motor to your Stallion jack, unfortunately. With that being said, I have 2 options below for you to check out. Both will be weld on applications, but are definitely worth looking at.

First is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This will have 38 inches of lift and is rated to a combined weight of 12,000 pounds. One of the big pluses with this unit is that the jacks are independent from each other, so you can really get everything level and stable. However, it is not inexpensive.

The Stromberg Carlson Electric Landing Gear Set # LG-1 on the other hand, has a much better price tag. This is rated lower though, and will handle 5,500 pounds and has 34-7/8 inches of lift. The two legs will also be attached to each other, so there isn't quite as much versatility.

If I'm completely off the mark with both of these, you may also want to look at the Bulldog Square Jack # BD182701 and the Powered-Drive Kit # BD1824200100. This is a square jack with 12,000 pounds of capacity and the powered-drive kit will convert it over to an electric jack. This may be the best option out of the three.