Can 7k Trailer Brake Assemblies be Used in 6k Trailer Axle Hub/Drums
Updated 08/12/2022 | Published 08/11/2022 >
Products Featured in This Question
Question:
I have a trailer with 6k axles. Will the 7k lb brakes Dexter work on these axles as long as the brake drum is the same size?
asked by: Mark G
Expert Reply:
Yes, 7k trailer axle brake assemblies like # 23-180-181 will fit 6k axle hub/drums. They use the exact same dimensions and bolt patterns which allows that. The difference is the strength or sensitivity of the magnets in the assemblies. The 7k axles have a magnet that is more sensitive and will pull harder on the drums. This might seem like it would give you more stopping power but in reality a 6k assembly set would just as easily lock up the brakes so there is no more stopping power gained. In reality it'll just make the brake controller setup a little more difficult as the sweet spot for brake output power will be harder to find. The best solution is to go with brake assemblies that were designed for 6k axles like the part # 23-105-106 for manual adjust or part # 23-458-459 for self adjusting assemblies.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Q&A: Looking For Replacement Brake And Hubs For Trailer With 92655 Hubs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Q&A: What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
- Search Results: 23~106~00
- Video: Hands-On with the Square Direct Weld Jack
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly-23-105
- Video: Feature Breakdown: TruRyde Electric Trailer Brakes
- Shop: Suspension Enhancement
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Will 6k Brake Assemblies fit 5,200 lb Trailer Axle
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly
- Video: Hands-On with the Dexter Electric Trailer Brake Assembly
- Q&A: Recommended Self-Adjusting Brakes and Hubs for a 2022 Heartland RV Torque TT T281 Toy Hauler?
- Video: Review of etrailer Replacement Return Spring etrailer Ram Square Direct Weld Jack - TJD-12000-RSP
- Q&A: Recommendation for Replacing Stallion Jack on Aluminum Gooseneck Trailer
- Q&A: Converting Stallion Landing Gear Jack on Trailer to a Powered Jack
- Q&A: Recommendations For Repairing Or Replacing An Older Stallion Jack
- Search Results: trailer lights
- Search Results: license plate light
- Search Results: light bar
- Search Results: rubber grease caps
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: electric jack

