Maintenance Lubrication and Cleaning for Pace Switchblade Tonneau

Question

Question:

Hoe do I best lubricate the tracks and protect the outer surface of my SwitchBlade retractable tonneau cover on my 2018 F-150? Ive had it now for a few years and it still looks and works great but I dont want to miss out on any preventative mnt.

asked by: Michael K

0

Expert Reply:

I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part # 311-SWFA06A29 that you asked about.

expert reply by: Jameson C

0

Maintenance Instructions from Pace
(click to enlarge)

Answer 1

Pace Edwards recommends using a 303 Protectant spray on the rails of the Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWF7084. They recommend periodically applying a generous amount of the 303 Protectant to a rag and wiping out the…

view full answer...

Answer 2

I went out to our warehouse and measured the Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles for RVs #5991-SM. The overall length is 3-7/8", 2-3/8" wide, 1/4" thick and the mounting holes are 1-1/8" on center.

view full answer...

Answer 3

For the Pace Edwards Switchblade we do have replacement seals. The Replacement Sweep Seal Roll #PE78UV comes in a 16' length and gets trimmed to fit. This will replace the sweep seals on the side rails for your Switchblade cover. The Replacement…

view full answer...

Answer 4

I spoke with a representative from Pace Edwards about your Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black, part #311-SWF7084, and he told me somethings you should double check. 1. There should be no more than…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Margaret! Congrats on the truck, those are super nice! Little too much for my blood though haha. In order to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1020 on your 2026 GMC…

view full answer...

Answer 12

Hello again, Randall, thanks for reaching out. I looked everywhere and I also was not able to find the exact T-slot size listed anywhere. I do know the bars use standard T-slots, so any accessory that is also made for standard T-tracks should work…

view full answer...

Maintenance Lubrication and Cleaning for Pace Switchblade Tonneau

Product Page this Question was Asked From

Continue Researching