Dimensions Of The Shim For Stromberg Carlson Lend-A-Hand Folding Grab Handles For RVs

Question

Question:

What are the dimensions of this shim! I will be mounting this handle on an aluminum sided rv, and I want to see how it would work for my application. Thank you.

asked by: Steve L

0

Expert Reply:

I went out to our warehouse and measured the Shim for Stromberg Carlson Lend-a-Hand Folding Grab Handles for RVs # 5991-SM.

The overall length is 3-7/8", 2-3/8" wide, 1/4" thick and the mounting holes are 1-1/8" on center.

expert reply by: Bryce D

0

Dimensions Of The Shim For Stromberg Carlson Lend-A-Hand Folding Grab Handles For RVs
(click to enlarge)

Answer 1

I spoke with a representative from Pace Edwards about your Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black, part #311-SWF7084, and he told me somethings you should double check. 1. There should be no more than…

view full answer...

Answer 2

For the Pace Edwards Switchblade we do have replacement seals. The Replacement Sweep Seal Roll #PE78UV comes in a 16' length and gets trimmed to fit. This will replace the sweep seals on the side rails for your Switchblade cover. The Replacement…

view full answer...

Answer 3

I attached a picture I got from Pace that covers exactly what the maintenance looks like for the Pace Switchblade tonneau covers like part #311-SWFA06A29 that you asked about.

view full answer...

Answer 4

Pace Edwards recommends using a 303 Protectant spray on the rails of the Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWF7084. They recommend periodically applying a generous amount of the 303 Protectant to a rag and wiping out the…

view full answer...

Answer 5

If you have a Stromberg Carlson Lend a Hand style RV hand rail we have the shim part #5991-SM which will push it out 1/4 inch. Two would get you to 1/2 inch like you need.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 10

Hey John! The Furrion Vision S+ #FR57AD does act as sort of a rear view mirror when you're towing or if you have an in bed camper, but it is not designed to replace the mirror on your vehicle. The camera stays on while you’re driving so you can…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3500 has the polyurethane molded bushings on the pivot arms. This is where noise and squeaking could come into play, so the manufacturer recommends using…

view full answer...

Dimensions Of The Shim For Stromberg Carlson Lend-A-Hand Folding Grab Handles For RVs

Product Page this Question was Asked From

Continue Researching