See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

• Anti-Rattle Device Suggestion while using a Towing Bike Rack and Pop Up Camper
  For use while towing with your pop up camper trailer and hitch mounted towing bike rack, the best option would be to use the Anti-Rattle Device for a 2 inch hitch # 63232. This device will eliminate any additional rattling by pulling the ball mount portion of the hitch to one side. It also provides a secure locking mechanism for your hitch. Please keep in mind that this locking device can only be used on hollow hitch devices, it is also advised to remove this locking mechanism when the...
  view full answer...
  
• Can Thule Spare Me Bike Carrier Be Mounted On Spare Tire At Rear Of Popup Camper
  The spare-mount bike racks we offer are not designed to be used on any towed trailer but I do have a solution for you. If you have a 2 inch trailer hitch I recommend a towing bike carrier like the Swagman Original Towing Bike Rack, part # S64675. This attaches to the ball mount in your trailer hitch and allows you to be able to carry up to 4 bikes between the rear of your vehicle and the camper. A longer ball mount is needed for this bike rack. You can check out part # 2736 or part...
  view full answer...
• Recommended Long Ball Mount That Fits Hitch Ball with 1 Inch Shank to Use with Swagman Traveler XCS
  I suggest using the Draw-Tite # 2736 ball mount. It measures 12 inches from the hitch pin hole to the ball hole and will work with your hitch ball that has a 1 inch shank. It also has a 3/4 inch rise. This will give you plenty of room along the ball mount to install the Swagman Traveler XCS Bike Rack # S64664 and still let you tow your popup camper.
  view full answer...
• 2 Inch Trailer Hitch Extension for 2014 Dodge Ram with Front Mount Trailer Hitch
  I do have a solution that might work for you, though it is not an extender. An extender would reduce your tongue weight capacity of the hitch by half, so it is not the best solution for you. Instead, I recommend a long ball mount. Take a look at # 2736 as an example. It is rated for 5,000 pounds and measures 12 inches long from the center of the hitch pin hole to the center of the ball hole. It has a 3/4 inch rise or a 2 inch drop. We also have # BM20. This ball mount measures 13-1/4"...
  view full answer...
• Towing Trailer and Carrying Bikes with Motorhome
  The Surco Ladder Mounted Bike Rack, part # SP501BR includes one strap that would typically be passed through the bike frames, the front wheels and around the ladder, which would prevent the wheels from spinning and would do a pretty good job of keeping the bikes in place. Adding bungees and foam padding of some sort would probably be a good idea if you are wanting to prevent the bikes from being scratched. The Swagman # S80600 would most likely interfere with a trailer, but it would depend...
  view full answer...
• Towing Bike Rack for a 2004 Volkswagen Touareg
  This bike rack will work as long as your 2004 Volkswagen Touareg has at least a Class III trailer hitch and a drawbar that has at least 3" of space. The trailer hitch's tongue weight capacity is reduced by the weight of the bike rack and the bikes when towing. If your ball mount does not have the required clearance you could use ball mounts, # 2736 or # D-28. Extra-Long ball mounts with a Rise/Drop usually do not work because of the angled metal supporting the ball mount face.
  view full answer...
• Will Drawbar Fit 2009 Chevy Traverse?
  I went out to the warehouse and measured ball mount # AMSC2. It is 4.75 inches from the pin hole to the weld. We do have drawbars that could clear the bumper and license plate face. For example, drawbar # 2736 is 7 inches from the pin hole to the weld. This may give you the clearance you need. It is a different design and a capacity of 5,000 lbs, but can get the job done for you. I have included a link to it below.
  view full answer...
• Options for Towing Trailer and Carrying Bike Rack on 2009 Ford Escape
  We do not have a dual receiver hitch for your 2009 Ford Escape with a 1-1/4 receiver hitch, however we do have several excellent options for you. You can use a Class III hitch like the etrailer Trailer Hitch Receiver, # e56AR. Check out the installation instructions that I have included for you. With this hitch you have the option of using a Hitch Mounted Towing Bike Rack # S64675. This rack fits firmly over the ball mount of your 2" receiver, enabling you to tow your trailer while carrying...
  view full answer...
• Solutions for Towing Forest River Roo Travel Trailer and Carrying Bikes Simultaneously
  There are a few different options that might work for you. A towing bike rack can be a good option depending on the tongue weight of your camper. The Curt # C18013 used in conjunction with an extra long ball mount like # 2736 or # D-28 (choose the one with the rise or drop you're needing) might be a good option, but keep in mind that the tongue weight capacity of the hitch would be reduced by the weight of the rack and the bikes. For instance, say the three bikes weigh 100 lbs. The rack...
  view full answer...
• Recommendation for a Bike Rack for Use When Towing a Trailer with a 1996 Jeep Cherokee
  There are a couple of options for you to carry a bike a rack and tow a trailer at the same time. First, you can use a towing rack. I recommend the Curt Clamp-on, part # C18013. It fits around a ball mount shank. A couple of things to note about this method are the ball mount length and the tongue weight. This bike rack requires that the ball mount have a distance of 10 inches from the center of the hitch pin hole to the center of the ball hole. If you need a ball mount that is compatible,...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?