What Kind Of Roof Rails And SUP Carrier Will Fit On My 2020 Lexus RX 350

Question

Question:

What kind of roof rails and SUP carrier will I need for my 2020 Lexus RX 350?

asked by:

0

Expert Reply:

We have the 2020 Lexus RX 350 Roof Rack by Thule. This will let you attach items and carriers to your 2020 Lexus RX 350's roof.
The Roof Rack kit Includes:

Thule WingBar Evo Crossbars - Aluminum - Silver - 50" Long - Qty 2
Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - Qty 4
Fit Kit for Thule Evo Flush Roof Rack Feet - 186044
Part Numbers: # TH711300, # TH710601, # TH186044.

You can pair this roof rack system with the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs # TH890000. This will let you take two kayaks of Stand Up Boards safely down the road and get you back on the water.

expert reply by: David B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

What Kind Of Roof Rails And SUP Carrier Will Fit On My 2020 Lexus RX 350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching