Troubleshooting Brakes Locking Up with a Curt Echo Brake Controller

Question

Question:

I have been using the Curt Echo 51180 brake controller for about 2 months without issue but last weekend after driving for 3 hours the brakes started locking up at slow speed bumper to bumper traffic. It got so bad that I had to disconnect the controller trailer is a Bushwacker tear so its pretty light. Ever since no matter what I try, the brakes still lockup. Any thoughts? Thanks

asked by: Mike

0

Expert Reply:

I would be happy to help you fix your Curt Echo item # C51180. First you will need to completely unplug the Echo from both trailer and truck, delete the app from your phone, reinstall the app, and then plug the Echo into the vehicle 7-way (by itself) until the Echo has a solid blue light. This should completely reset your settings and you will be good to go when re-pairing your Echo.

expert reply by: Jerred H

0

Answer 1

We have actually run into this issue quite a few times in the past, and there is a simple fix. The reason the Curt Echo Wireless #C51180 locks up the brakes on your camper only at low speeds is due to it being paired incorrectly, usually plugging in…

view full answer...

Answer 2

The first thing to check is to make sure that the sensitivity or output settings on your Curt Echo #C51180 did not change from your original settings. It also may be beneficial to re-adjust the controller from scratch. In order to do this, Curt…

view full answer...

Answer 3

I have a couple things you can check that may help you. First check to make sure you have the most up to date version of the Curt Echo app and that your app has permission for Bluetooth active. Also in the app you will need to make sure that a manual…

view full answer...

Answer 4

In order to troubleshoot your braking issues with the Curt Echo #C51180, first start by adjusting the output settings on your controller. Curt recommends testing the controller output by driving forward on a dry and level paved or concrete surface.…

view full answer...

Answer 5

According to the troubleshooting directions, the Er code that is showing on your Prodigy brake controller indicates that there is an internal brake control problem. There is nothing that can be done to fix this and the recommendation is to return the…

view full answer...

Answer 6

There are a few different tests that can be done to check the brake magnets individually and as a whole on your trailer. I would first recommend checking the magnets for wear before going on to test for proper amperage. If the magnets show abnormal…

view full answer...

Answer 7

Yes, make sure you are only using the Curt Echo Wireless Brake Controller Item #C51180 you referenced. Any other brake controller should not be used at the same time. This is taken directly from the Echo instruction manual and should walk you through…

view full answer...

Answer 8

If the Curt T-Connector Vehicle Wiring Harness #C27BR was installed correctly on your 2022 Jeep Grand Cherokee L you shouldn't be getting any of those lights. The only time you would see those lights is if the kit wasn't installed correctly…

view full answer...

Answer 9

Sorry to hear about the issue you are having with your Curt Echo #C51180. I reached out to my contact at Curt and he had a few things to check, but mentioned the blue ring will always go all of the way around when the output setting you chose has…

view full answer...

Answer 10

The orientation/angle of the Curt Echo Mobile Trailer Brake Controller part #C51180 does not matter. We have tested it on vehicles with 7-way's oriented/angled in all different directions and it has performed flawlessly. Therefore, you should not…

view full answer...

Answer 11

Having LED lights on the tow vehicle as well as the trailer should not cause you any issues, and the Curt #C51180 Echo brake controller will work very well for you. Just to be sure, I checked with my contact at Curt who affirmed that everything would…

view full answer...

Answer 12

I would be happy to help! Based on the description you provided of the braking feel you are getting with the Curt Echo Wireless #C51180 on your 2003 Toyota Sequoia to control the brakes on your 3500lb Jayco Jayfeather Camper I recommend lowering the…

view full answer...

Troubleshooting Brakes Locking Up with a Curt Echo Brake Controller

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching