Replacement Locking Tab and Center Punch Lock Nut For a Demco Hijacker 5TH Wheel Hitch

Question

Question:

I need part number 14413-95 and part 00173. Can find this anywhere.

asked by: Brandon R

0

Expert Reply:

We have the Replacement Locking Tab # DM98MV (14413-95) and Replacement Center Punch Lock Nut # DM48MV (00173). These are the replacement parts for the Demco Hijacker that you are needing.

expert reply by: Bud M

0

Answer 1

We don't offer a video, but that's a great idea that I'll suggest to our shop manager. The maintenance procedures for the Demco #DM8550040 Hijacker Autoslide 5th wheel hitch are outlined in the linked owner's manual, but the keeping…

view full answer...

Answer 2

The MORryde CRE3000 #MR87ZR could work for your trailer but you need to take one more measurement. On your current equalizer measure the distance between the lower bolt hole centers. If that distance is 6-1/2 inches or pretty close to that this will…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Locking Tab and Center Punch Lock Nut For a Demco Hijacker 5TH Wheel Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching