Looking for Replacement Leaf Springs for 2007 Carriage Cameo with 7k Dexter Axles

Updated 10/27/2026 | Published 10/26/2026

Products Featured in This Question

6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 25-1/4" Long

(206)

$116.94

U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts

(2287)

$68.93

Question:

Hello, I have a 2007 Carriage Cameo 5th wheel, dual Dexter 60826 7000lb axles. I need to replace the leaf springs, can you help me with the correct part number as well as for new ubolt kits. I know there are 6 leafs, 1 5/8 wide but cant get accurate length from eye to eye. Is that enough information to determine the correct leafs and ubolt kit? Thank you.

asked by: Joe G

Expert Reply:

Hey Joe, welcome back! Most likely the correct replacement leaf spring is the part # TRU52FR but you do need to measure the current springs you have from eye to eye without a load on the trailer to verify as we don't have a way to look up what length you'd need.

Then for a U-bolt kit we know for sure what you'd need is the part # APUBR-8 since your axle is 3 inches in diameter.

expert reply by: Jameson C

Joe G.

10/27/2026

Thanks for the reply Jameson. I'm currently replacing the LRE spring and installing a Wetbolt kit, and since trailer is 20yrs old, going to do the springs as well. I did measure rear at 25.25 and front 25.50, wasn't sure which length to use, but I bet you are correct.

Jameson C.

10/27/2026

@JoeG glad to help! Based on what you mentioned the part # TRU52FR is the correct spring you need. They have a tendency to stretch or flatten out and get longer over time which explains the longer length.