What is the Best Replacement for the Jensen JWM6A on My 2017 Thor Synergy TT24

Question

Question:

The LCD display and remote Have failed on my JWM6A in my 2017 Thor Synergy TT24. What is the best replacement for that unit? Are they plug and play with the same connectors, or will they require rewriting?

asked by: Tim S

0

Expert Reply:

The replacement stereo I would recommend for your 2017 Thor Synergy TT24 Motorhome is the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A. The # JWM60A is the updated model of the JWM6A, they use the same pigtail so there won't be any rewiring needed.

expert reply by: Thomas M

0

Answer 1

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

view full answer...

Answer 2

The Jensen #JWM60A does not have HDMI ports so you would have to make your connections using the RCA ports in the back of the unit if you went with this stereo. The iRV #IRV64FR has an HDMI port on the front as well as RCA ports on the back to make…

view full answer...

Answer 3

Yes, the Dexter 8k hub/drum part #8-218-9 could be used to replace the hub you mentioned #8-285-9UC3.

view full answer...

Answer 4

Your Jensen RV Stereo, #JWM60A and JWM62A has multiple connection points that let you link other devices. There is 1 front auxiliary audio input, 1 USB, 1 rear audio RCA input, 1 rear audio RCA output, 1 rear video output, as well as the AM/FM…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

What is the Best Replacement for the Jensen JWM6A on My 2017 Thor Synergy TT24

Featured Help Information

Miscellaneous Media

Continue Researching