Timbren Suspension Enhancement System item # T62FR Dimensions

Question

Question:

What are the measurements from top of spring to bottom of mounting plate? Thank you Rick

asked by: Rick A

0

Expert Reply:

I just spoke with my rep at Timbren. The height of the Timbren Suspension Enhancement System - Rear Axle
Item # T62FR for your 2010 Toyota Tundra is 3 9/16 inches for the rubber spring portion and 1 5/16 inches for the bracket with a combined overall height of 4 7/8 inches.

expert reply by: Jerred H

0

Answer 1

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 2

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…

view full answer...

Answer 7

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Timbren Suspension Enhancement System item # T62FR Dimensions

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching