Are Add-On Steps Available for TorkLift Glow Step RV Steps

Question

Question:

I need tk add an additional step. Do you sell just one step?

asked by: Ron M

0

Expert Reply:

If your current TorkLift steps are the 2-to-5 step GlowStep Revolution models with 27-7/16" wide mounting bases, part # TLA8002, # TLA8003, # TLA8004, or # TLA8005, you can use the TorkLift Add-A-Step, part # TLA8001.

If your Glow Steps aren't one of the models mentioned above, let me know the part number and I'd be happy to check to see if TorkLift offers anything that would work for you.

expert reply by: Mike L

0

Answer 1

To determine if the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier for RVs #LC125460 will be compatible with your 2014 275ULSBS Work n Play trailer you'll need to measure the chassis to ensure the mounting brackets line up…

view full answer...

Answer 2

You would need to support the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly #LC370762 the entire length and would not want to cantilever over the 8" drop. To complete the tray you'll need to choose the appropriate size…

view full answer...

Answer 3

Lippert didn't have the dimensions for how far out the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly #LC370762 extends in either direction so I had one pulled from stock and did a bit of testing. On one end of the assembly…

view full answer...

Answer 4

Since your cut out height is 33 inches the correct Torklift Scissor GlowStep is the part #TLA8003 which has a height range of 25-1/2 inch to 36 inch. You do measure from the top of the cutout down to the ground. I attached a review video for this for…

view full answer...

Answer 5

If your trailer's mounting bracket width is 25-1/2" and your entry height (ground to the mounting brackets) is 24.5" then you would need the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8102. This step has an entry…

view full answer...

Answer 6

I really wish we carried a triple step that would mount up to your RV without any modification but it looks like the best option we could provide would be to get a triple step like the part #TLA8103.

view full answer...

Answer 7

Hey Rad, it comes down to what the door threshold height is of your camper which Torklift Glowstep would be correct for you. If the entry height is between 25-1/2 inches and 36 the part #TLA8103 would be correct. Here are the other height ranges if…

view full answer...

Answer 8

I spoke to my contact at Torklift and he informed me that the left to right width of the mounting bracket of the Torklift Glowstep Revolutions like the part #TLA8003 is 27-1/2 inches and the front to back depth is 12 inches. All of the Torklift steps…

view full answer...

Answer 9

My TorkLift contact advised that on their GlowStep Revolution Scissor Step #TLA8003 the distance from the top of the frame bracket down to the top step is 7-inches. Unlike most others this step offers some adjustability. If you are at a campsite that…

view full answer...

Answer 10

Steps like the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8104 are not fit guided for year, make and model of trailer the way a trailer hitch is for a passenger vehicle, which means you will need to take a couple simple…

view full answer...

Answer 11

Good news, I can help you find a wider step than the 24 inch LC341504. I've linked all the steps for you but if you look through the filters there should be a measurement column and there are sizes from 14 inches to 30 inches wide. The Lippert…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Are Add-On Steps Available for TorkLift Glow Step RV Steps

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching