Correct Brake Controller Wiring Harness and Connector Location in 2018 Ford E450 Cutaway Van Chassis

Question

Question:

I have a 2018 Ford E450 RV Harness 3034-P plug seems to small to fit. Ideas?

asked by: Larry

0

Expert Reply:

According to my contact at Tekonsha, the # 3034-P is indeed the correct brake controller harness for installing the # 90195 Tekonsha P3 Brake Controller in a 2018 Ford E450 Cutaway van chassis.

I suspect that the connector you've found is the incorrect one, which is why the # 3034-P isn't fitting for you.

The connector you're looking for is pinned to the back of the coin pocket/storage cubby above the radio as shown in the provided photos. I hope that will help you find the correct connector.

I'll link to a demonstration video that explains how the Tekonsha P3 brake controller works.

expert reply by: Mike L

0

Brake Controller Connector Location 2018 Ford E450 Van Cutaway Chassis
(click to enlarge)

Answer 1

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 2

The correct Tekonsha brake controller adapter harness is the part #22292 you'd looked at. The #22292 plugs into the factory connector located behind the dash, as shown in the video I've linked for you. The plug location can be seen by fast…

view full answer...

Answer 3

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Correct Brake Controller Wiring Harness and Connector Location in 2018 Ford E450 Cutaway Van Chassis

Featured Help Information

Miscellaneous Media

Continue Researching