4-Way Replacement for 2014 Audi Q7 with 7-Way

Question

Question:

i have a 2104 Audi Q7 with factory towing package on it. I want to make it into a 4 way plug. how can i do that?

asked by: Luis R

0

Expert Reply:

Since your 2014 Audi Q7 had a factory 7-way you could replace it with the part # 41155 and you'd have a 4-way in place of the 7-way.

expert reply by: Jameson C

0

Answer 1

For a 4-way trailer connector that plugs directly into the factory round tow package connector we have Hopkins #41155. I've linked a video review for you to take a look at.

view full answer...

Answer 2

Thanks for the picture of the trailer wiring connector you have on your 2014 Volkswagen Touraeg, based on that your vehicle is wired for a 7-way and just missing the socket. So the easiest solution to give you a 4-way is the part #HM40975 that you…

view full answer...

Answer 3

Trailer brake controllers like the Tekonsha Prodigy P3 #90195 are not vehicle-specific so you absolutely can use this excellent Tekonsha controller in the 2014 Q5. This application will require a brake controller installation kit, part #ETBC7, which…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

4-Way Replacement for 2014 Audi Q7 with 7-Way

Continue Researching