Does Curt Front Mount Trailer Hitch C31089 Fit A 2021 Ram 2500 Crew Cab 4WD Diesel?

Question

Question:

I have a 2021 Ram 2500 crew cab 4wd pickup powered by the 6.7 Cummins Diesel. The description on the hitch states it is for the Diesel model but the next line reads Diesel excluded. I would like to order one for my truck. Can you please advise me on the correct part number. Thanks

asked by: Mark B

0

Expert Reply:

The Curt Front Mount Trailer Hitch # C31089 you were looking at for your 2021 Ram 2500 Crew Cab 4WD Diesel is a confirmed fit.

The reason the product page says fits diesel models and excludes diesel models is that it fits both engine styles where some of the other hitches available only fit one or the other.

The # C31089 has a 500lb vertical load limit and 9000lb line pull rating making it a perfect choice for a winch or for carrying a bike rack or cargo carrier.

I included a link to the written instructions of the # C31089 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

We actually have two options available for front mount hitches on your 2020 Ram 2500 Diesel. First is the Curt #C31089. This is assembled in America, has 9,000 pounds of line pull capacity and 500 pounds of vertical load capacity. Next is the…

view full answer...

Answer 2

Hey Neal, we have confirmed with Curt in the past that the front hitch part #C73ZV is confirmed to fit your 2022 Ram 2500 Power Wagon. What are you planning on putting in the front hitch?

view full answer...

Answer 3

We do have a front hitch available for your 2024 Ram 2500. That is the Curt Front Mount Trailer Hitch Receiver #C73ZV. This hitch features a 9,000 lb line pull and vertical load of 500 lbs. It also has a bolt-on installation. However, trimming of the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Does Curt Front Mount Trailer Hitch C31089 Fit A 2021 Ram 2500 Crew Cab 4WD Diesel?

Continue Researching