Recommended Replacement Spare Tire for Coleman Lantern 263BH

Question

Question:

Is there a load range D tire in the same size?

asked by: Lindsay

0

Expert Reply:

We do have a selection of ST 215/75r14 tires available with and without wheels included, so we can certainly help you find the tires you need. Which wheel you'll need will depend on the bolt pattern of your current wheel, but a combo like the Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C # AM32182 matches your current tire size and gives you a nice combo for your Coleman Lantern 263BH. This would function well as a spare for your trailer and has a capacity of 1870-lbs per wheel.

If you just needed a tire then the Karrier ST215/75R14 Radial Trailer Tire - Load Range C # AM10229 would also be the same size and then you could choose a wheel of your liking to match your old wheels. I've linked our entire selection of 14 inch wheels for you to check out, but you can have them mounted at any local tire shop if you wanted to go that route.

expert reply by: Erik B

0

Lindsay

9/4/2021

Is there a load range D tire in the same size?

Erik B.

9/4/2021

If you need a tire with a Load Range D then you can use the Provider ST215/75R14 Radial Trailer Tire - Load Range D # TTWTRTM2157514D; these aren't available in a combination but you could use any of the 14 inch wheels linked to this answer and they'd work well. If your trailer currently has Load Range D tires then you're going to want to replace them with the same so that you don't lose any carrying capacity. The Provider ST215/75R14 Radial Trailer Tire - Load Range D # TTWTRTM2157514D have a capacity of 2200-lbs per tire.

Answer 1

As long as the valve stem in your wheel can handle the higher 75 psi rating of the 8-ply Load Range D tire and you don't plan on exceeding the lower weight rating of your wheels then you'll be just fine. If you need to upgrade your valve stem…

view full answer...

Answer 2

You can pretty easily go from a 205/75-14 to a 15 inch tire size like 205/75-15 like with the #AM32395 without clearance issues. This will give you a slightly larger wheel and tire which will have a higher weight capacity. So you might gain a slight…

view full answer...

Answer 3

If the center to center distance between adjacent tire mounting holes is 2-5/8 inches, you do indeed have a 5 on 4-1/2 inch bolt pattern. Going with two of the Kenda Karrier #AM32181 ST215/75-14 load range C radials which carry an 81mph M speed…

view full answer...

Answer 4

Thanks for reaching out! What size tire (located on sidewall) is currently on your 2022 Colman Lantern 263BH and what wheel bolt pattern do you have? I tried finding those specs but they aren't readily available anywhere. If you have a specific…

view full answer...

Answer 5

The 24 inches is correct but make sure you are measuring in the correct place. You will measure diagonally from the center of the ball cavity on the trailer coupler back 24 inches along the trailer frame. This is where the center of the ball on the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Recommended Replacement Spare Tire for Coleman Lantern 263BH

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching