Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When a trailer is fully packed, you need a wheel that can carry the weight without flexing or fatigue. The Dexstar Steel Mini Mod Trailer Wheel is rated for 2,200 lbs and uses a sturdy 14" x 5-1/2" steel rim with a 0 offset for balanced load handling. It meets DOT standards and keeps its shape mile after mile, whether you’re towing near home or running at highway speeds.
Moisture and road grime are tough on metal, so this wheel gets a full 2-step finish to keep rust away. It’s first treated with an e-coat primer, then sealed with a black powder coat that adds both shine and protection. The result is a clean look that holds up through rain, heat, and rough travel conditions.
Nothing slows down a project like unclear fitment specs. This wheel uses the common 5 on 4-1/2" bolt pattern, a 3.19" pilot diameter, and standard 1/2"-20 wheel bolts, so it installs easily and seats securely on compatible hubs. The valve stem hole measures 0.453", which pairs neatly with a compatible high-pressure valve stem when needed.
The Dexstar’s zero offset puts the mounting surface right in the middle of the rim, keeping the wheel centered on the hub for even pressure across the bearings and tires. That means smoother tracking down the road and predictable handling when you’re loaded or empty.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexstar 14 inch by five and 1/2 inch black modular design steel trailer wheel with a five on four and 1/2 inch bolt pattern. Now, this wheel's a sturdy steel construction. It is a modular design, and when we say modular design, that's the one that has the round holes all the way around the wheel. This wheel gives you excellent corrosion resistance, 'cause they use a two step finishing process, which will include first an eco primer, and then a black powder coat finish. This is a high quality wheel.
It does meet the DOT, Department of Transportation specifications. If you notice the center cap is not included. If you do want a center cap, we do sell those separately on our website. You do want to get a center cap that'll match this diameter of the pilot hole, which on this wheel is 3.19 inches. 'Cause when you install that center cap, it will go through this hole.
This wheel is made in the USA. A few dimensions on this we're gonna measure is the diameter and the width. Now, when you measure the diameter, you're gonna be measuring inside to inside. And the reason you do that, is when a tire's mounted on this wheel, the tire beads are gonna seat right here. So basically you're measuring from bead seat to bead seat to get the diameter.
So if we get a tape measure and we go straight across, there's your 14 inch diameter. The width on the wheel is the same way, bead seat to bead seat, so inside to inside, five and 1/2 inches wide. Now the bolt pattern on this wheel is a five on four and 1/2 inch bolt pattern. And if you we inchesre to measure that on the wheel that's an odd number of lugs like this wheel, what you wanna do is pick one of the holes, let's say this one, and then you're gonna measure across from this hole to either one of these holes. But when you measure it, you'll measure from the center of the starting hole to the furthest edge of whichever hole you measured to.
So on this one, if we measure, it'll be four and 1/2 inches, so that means it's a five lug, four and 1/2 inch bolt pattern. Does use a wheel lug size of 1/2 inch by 20, and the weight capacity on this wheel is 2,200 pounds. Now always remember, if you have any questions regarding this product, please don't hesitate to contact us via phone, chat, or email, or if you've already purchased this product, please send us pictures of it being used in your application. But that's gonna do it for a look at this Dexstar 14 inch by five and 1/2 inch black modular design steel trailer wheel with a five on four and 1/2 inch bolt pattern.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
John K.
11/15/2020
A year later, rims are still like new and working great. Thanks again!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
7/9/2025
Been great, no issues