Infinite Rule Hitch Lock 3 Hitch Compatibility

Question

Question:

Will the infinite rule hitch lock with 3 5/8” span fit the 3” hitch on a 2020 Ford F-350?

asked by: David N

0

Expert Reply:

The InfiniteRule Hitch Lock # 34061073-D is for 3" Hitches and will fit your 2022 Ford F-350.

expert reply by: Adam E

0

Answer 1

Hi John, By far my favorite hitch lock for the B&W Tow & Stow 3-Ball Mount - 3" Hitch #BWTS30048B is the InfiniteRule Hitch Lock for 3" Hitches #34061074-D. The InfiniteRule locks are very strong, with a 42,000 lb shear strength,…

view full answer...

Answer 2

The Hitch Lock and Adjustment Pin Lock Set for 2-1/2" Flash Solid Steel HD Adjustable Ball Mounts #FA86-00-4225 will not fit a 3" trailer hitch as it is not quite long enough, assuming the reducer goes inside the 3" hitch in your Ford.…

view full answer...

Answer 3

Between the Shocker Hitch and Gen-Y Torsion ball mount, I recommend the Gen-Y. Its rubber torsion arms are going to absorb road shock naturally due to its design, while the Shocker Hitch requires constant maintenance that isn't needed with the…

view full answer...

Answer 4

The note that says, "Designed for flat towing only. Do not use to tow a trailer" means it is only rated to dinghy tow a vehicle with four wheels down behind a motorhome. So it cannot be used on your truck to tow a trailer as it is not rated…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 7

Hi Steve, The Curt Hitch Receiver Reducer Sleeves - 3inch to 2-1/2inch or 2-inch part #C45408 has a pin hole diameter of 3/4". However, since this is adapting all the way down to a 2 inch, you'll need to use a 5/8" pin because the pin…

view full answer...

Answer 8

Hi Marvin. Great question. The best option I’ve personally seen work well on Brinkley travel trailers with the propane box is the B&W Continuum (part #BW78FR if you have a 2-inch trailer hitch on your truck or #BW28FR if you have a 2.5-inch…

view full answer...

Answer 9

Honestly Tim, there is nothing on the B&W Continuum Weight Distribution System #BW28FR which provides any type of sway prevention. They rely on the fact that the truck will remain level which reduces trailer sway. Personally I recommend using the…

view full answer...

Answer 10

The B&W Continuum Weight Distribution System #BW28FR works to reduce sway from occurring by distributing the tongue weight evenly across your vehicle. It does not have a physical sway prevention like a Friction Sway Bar #17200 or other weight…

view full answer...

Answer 11

Hey Vernon, thanks for reaching out and providing all of the details! It sounds like you have the 10K Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 which will work just fine with the B&W Continuum #BW28FR.…

view full answer...

Answer 12

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

view full answer...

Infinite Rule Hitch Lock 3 Hitch Compatibility

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching