How Much Distance Is Between The Soft Touch Assist Handle And The RV Wall

Question

Question:

How much space between the rv wall and where you grab the hand grip?

asked by: Cindy

1

Helpful Expert Reply:

The distance between the rv wall and where you grab the hand grip of the Soft Touch Assist Handle - Black with Black Grip, part # AH-150, is an 1-1/4".

I have included a video review and a diagram below.

expert reply by: Mark Smith

1

Soft Touch Handle Dimension
(click to enlarge)

Answer 1

The mounting base for the Soft Touch Assist Handle #AH-150 measures 2" x 2-1/2" both for the top and the bottom base sections. Attached is a review video for you to reference.

view full answer...

Answer 2

Sounds like you are looking for a way to have two handles on your RV. One further out to help with the lower steps and one closer to the body which helps more on the higher steps. For that the best option would be the Lend-A-Hand part #AM-800 which…

view full answer...

Answer 3

To install the Soft Touch Assist Handle, #AH-150, you will place the Soft Touch rail at the intended mounting location. (The mounting holes of the Soft Touch rail are offset, allowing you to secure the rail to your coach's door frame.) The weight…

view full answer...

Answer 4

Hey Marvin, We offer two 18" long grab handles; Black with Black Grip #AH-150 and White with Black Grip #AH-100. I recommend putting some butyl tape #AL28FJ on the back of the handle to prevent water from leaking in through the screws.

view full answer...

Answer 5

The most popular handle we offer that would as closely match the dimensions and mounting holes of your previous handle is the Lend-a-Hand Folding Grab Handle #AM-200. This is 24 inches tall and would do a great job making it easier to get in and out…

view full answer...

Answer 6

I recommend checking out the Camco Fold-Away RV Grab Handle #CAM42175 as an alternative to the Soft Touch Assist Handle #AH-150. This handle has a folding feature to minimize how much it sticks out from your RV when not in use, and it's about…

view full answer...

Answer 7

Hey Daniel, the closest option to what you need that we have is the part #JR79ZR which has 7-7/8 inches between the mounting holes but we don't have any options that have 8 inches between them.

view full answer...

Answer 8

That is a pretty cruel prank someone could pull, and dangerous. You would need to either prevent the handle from being folded towards the door by blocking the path or secure the handle so it sticks out all the time. Since you would need to fold it in…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

How Much Distance Is Between The Soft Touch Assist Handle And The RV Wall

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching