Choosing The Correct 4-Way Wiring Harness For a 2020 Chrysler Pacifica

Question

Question:

will #118723 work for a 2020 pacifica limited with led tail lights

asked by: Jim V

1

Helpful Expert Reply:

The Tekonsha T-One Vehicle Wiring Harness # 118723 is designed to work with the LX and Touring Trims of your 2020 Chrysler Pacifica. These trims do not have LED tail lights.

For your Limited trim you will need either the Curt T-Connector Vehicle Wiring Harness # C56322 or Tekonsha T-One Vehicle Wiring Harness # 118712.

To ensure correct fitment it is best to check your VIN number to ensure that you get the correct kit. The 7th Digit of your VIN number will tell you what trim level you have.

LX - C
Touring - D
Touring Plus- F
Touring L- B
Touring L Plus- E
Limited- G

The Tekonsha T-One Vehicle Wiring Harness # 118712 fits the Limited, Touring L, Touring L Plus and Touring Plus Trims. These trims come from the factory with the LED tail lights on your Pacifica.

expert reply by: Bud M

1

Answer 1

The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR is the most concealed option for your 2023 Chrysler Pacifica. This allows you to remove the 2" receiver when not needed so you will not see any portion of the receiver below your rear…

view full answer...

Answer 2

The Chrysler Pacifica began production with the 2017 model year, so there was no 2016 model Chrysler Pacifica. Some auto manufacturers release the next year's model in late spring or early summer of the previous year, so it's easy to mistake…

view full answer...

Answer 3

I took a look at the online version of the owner's manual for your 2018 Chrysler Pacifica and it states that for this vehicle without the factory tow package it can pull a trailer that weighs up to 1,500 pounds. For models with the factory tow…

view full answer...

Answer 4

Any GMC Acadia 2020 or newer would need to be towed on a dolly like the Roadmaster Tow Dolly #RM-2050-1. The 2019 and earlier models are able to be flat towed. If you have a 2019 model (or earlier) that you need to set up to flat tow, I can…

view full answer...

Answer 5

Hey Carlos, so I was able to find that you have the Draw Tite hitch part #76046 installed on your 2017 Pacifica which is a design that has solid ground clearance but we do have the Curt #C65CR which has 1/2 an inch better ground clearance. That…

view full answer...

Answer 6

I do have an option for you but Atwood is no longer in business so the only option would be a full replacement for which I recommend the Demco 50-Degree A-Frame Trailer Coupler part #DM16680-52. It features a bolt-on install, easy couple design, and…

view full answer...

Answer 7

For your 2022 Chrysler Pacifica Hybrid I recommend the draw tite #76046-SK. This has been confirmed to fit hybrid models. I prefer this hitch over the others because it can hold more tongue weight (675 lbs) than any other hitch we offer. This will be…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C22UR and etrailer Trailer Hitch Receiver #e56RR are essentially the same exact trailer hitch with the only difference being the paint. The Curt has a glossy black finish, while the etrailer has a matte black finish.…

view full answer...

Answer 9

Hey Christopher, The absolute best trailer hitch for your 2024 Voyager is the Draw-Tite #76046 because it has a fixed (non-removable) receiver and a hidden crosstube. This means you'll have a strong hitch that doesn't reduce your ground…

view full answer...

Choosing The Correct 4-Way Wiring Harness For a 2020 Chrysler Pacifica

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching